Dave's 668AWHP Evo X MR SST! WITH SHORT VID
Dave's 668AWHP Evo X MR SST! WITH SHORT VID
Yes. The time finally came yesterday where I picked up by Evo X MR from Moore Automotive.
Let me first shout out to Chris @ Moore Automotive for being the best Tuner/Tech an Evo owner could ask for.
The transmission came out a total of 12? or something times before all was right. Many, many, 10PM nights.
Also, a huge shout out to Eric @ Kozmic Motorsports for walking us through the right steps for a high horsepower MR. Without him, we wouldn't have been successful.
Anyways, on to business.
I'll do a complete mod list in my own build thread after work, but for now, here's the basics -
Built Motor
Wiseco pistons
Manley rods
ARP head studs
GSC S2 cams
Walbro 450 with hanger
FPR
"Built SST"
SSP 600hp clutch packs
SSP Deep Pan Cooler
Viton Seals
TCU tuning help from Eric @ Kozmic
AMS 900xp Turbo kit
Open Dump
Full exhaust
Supporting mods
Im missing a bunch of stuff but that's it for now.
SORRY THERE IS NO FULL DYNO SHEET. I took this pic with my cell phone. Will post a better one up I promise!
What you are seeing is uncorrected numbers. The 2nd run (highest) was a tad too lean for Chris' liking so he dialed it back a little.
Corrected we ended up at 668/450 or something like that.
http://i60.tinypic.com/s6hj6s.jpg
The car pulls like no other. My 730RWHP 5.3 Coyote stroker doesn't feel as fast. The SST puts power to the ground and shifts like perfection.
Just a little 3rd gear pull - 3/4 throttle.
View My Video
Let me first shout out to Chris @ Moore Automotive for being the best Tuner/Tech an Evo owner could ask for.
The transmission came out a total of 12? or something times before all was right. Many, many, 10PM nights.
Also, a huge shout out to Eric @ Kozmic Motorsports for walking us through the right steps for a high horsepower MR. Without him, we wouldn't have been successful.
Anyways, on to business.
I'll do a complete mod list in my own build thread after work, but for now, here's the basics -
Built Motor
Wiseco pistons
Manley rods
ARP head studs
GSC S2 cams
Walbro 450 with hanger
FPR
"Built SST"
SSP 600hp clutch packs
SSP Deep Pan Cooler
Viton Seals
TCU tuning help from Eric @ Kozmic
AMS 900xp Turbo kit
Open Dump
Full exhaust
Supporting mods
Im missing a bunch of stuff but that's it for now.
SORRY THERE IS NO FULL DYNO SHEET. I took this pic with my cell phone. Will post a better one up I promise!
What you are seeing is uncorrected numbers. The 2nd run (highest) was a tad too lean for Chris' liking so he dialed it back a little.
Corrected we ended up at 668/450 or something like that.
http://i60.tinypic.com/s6hj6s.jpg
The car pulls like no other. My 730RWHP 5.3 Coyote stroker doesn't feel as fast. The SST puts power to the ground and shifts like perfection.
Just a little 3rd gear pull - 3/4 throttle.
View My Video
. Looking forward to more videos.
