2012 Evo MR

Mods:

- Turbo xs downpipe
- Circut speed test pipe
- invida q300 cat-back
- ETS 3in intercooler
- ETS upper intercooler pipe
- Aem intake
- Grimmspeed 3-port boost controller
- 92 octane pump gas
- Walbro 255lph

English racing engine/trans tune

All pulls done in 4th gear

Put down a good 334whp and 325tq at 26psi tapering to 19psi by redline

Thanks to english for another good tune, Sst trans shifts real good and evo pulls hard a smooth.

Took Evo x to the drag strip yesterday(6-11-14)and with some not so consistant launches I ran a 12.4 @ 108mph as the quickest so far
1.7 60ft was quickest averaged 1.8 60fts

Mods Coming:

MHI TF06-18K Turbo
GSC S1 Cams
FIC 1100cc Injectors
ETS Intake

 

What tuning software do you use? Do you know if they E-tune? Nice numbers!

 

Solid numbers. Aaron has definitely been figuring out the SST since he picked his up and the new SST tune I got a few months back was great. Enjoy the new found power!

Ralliart09er : I know he travels at times to tune but not sure if he does etunes. He does have some good ralliart experience so always worth giving them a call, they're a great shop.

 

 

We do offer E-tunes as well.

 

Is 26PSI a safe number for an MR?

 

92 octane makes a tremendous difference vs Cali 91. In a back to back test we found Cali 91 was actually worse than WA 89.

 

do you guys accept etune without wideband?

 

You have to have something in the car to verify what the AFR is, that the Fuel pump relay is working, etc. I can tune from the narrowband voltage but it is definitely not the preferred way. You dont necessarily have to log the WB but you should have one in the car, yes.