EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)
-   Evo X Engine Management / Tuning Forums (https://www.evolutionm.net/forums/evo-x-engine-management-tuning-forums-257/)
-   -   what's your awhp? (https://www.evolutionm.net/forums/evo-x-engine-management-tuning-forums/561253-whats-your-awhp.html)

initial87 Jun 18, 2011 04:52 PM

what's your awhp?
 
hey guys....

i've done some mods on my X. i always want to do a tune and expect a totally different feeling on my X. but before i do it, i would like to gater some info about it...

my mods are...ETS intake...RRE upper and lower piping...AMS intercooler...jic dual exhaust and Hks downpipe...this is pretty it...

would like to know has anyone mod the same parts like me...and how much do u have before a tuen and how much do u gain after a tune.

Toxin Jun 22, 2011 01:48 AM

https://www.evolutionm.net/forums/ev...o-results-298/

Enjoy.

tephra Jun 22, 2011 02:45 AM

I actually ran my car up last night on the way to a job... VD reports 350/350 whp/wtq with a correction factor of 1.0.

I get about 260 wkw on a DD dyno - so it's about right... :) (stock car = 160 wkw on this dyno)

cosworth panel filter + 3port + slightly different turbo + meth + HFC + gutted stock muffler

The turbo is worth about 20kw over stock, but with a 3" catback that turbo would probably gain another 10kw...

Mad_SB Jun 22, 2011 04:34 AM


Originally Posted by initial87 (Post 9401267)
hey guys....

i've done some mods on my X. i always want to do a tune and expect a totally different feeling on my X. but before i do it, i would like to gater some info about it...

my mods are...ETS intake...RRE upper and lower piping...AMS intercooler...jic dual exhaust and Hks downpipe...this is pretty it...

would like to know has anyone mod the same parts like me...and how much do u have before a tuen and how much do u gain after a tune.

A decent tune should gain you twice what you have gained from the bolt on parts... and it will cost less than half as much. You will kick yourself for not doing it sooner{thumbup}

JDMCT9MR Jun 30, 2011 08:42 AM

I am making 340whp/366wtq at 25 PSI with dp back exhaust,ARC FMIC,AEM intake,and HKS I/C piping.


All times are GMT -7. The time now is 12:42 PM.


© 2026 MH Sub I, LLC dba Internet Brands