AMS MC ring install help
Thread Starter
Evolved Member
iTrader: (3)
Joined: Mar 2006
Posts: 2,072
Likes: 3
From: Southeast USA
AMS MC ring install help
Hey guys,
Sorry to bother you for such a trival task, but I cannot get my hands well enough on the clutch master cylinder to even remove it.
AMS instructions state to remove the reservoir line AT THE MC. I can't even get my hands on it at the MC, let alone remove a clamp. I have the tranny and clutch/flywheel removed so access from the bottom is easy...yet I can't seem to contort my hands well enough to follow AMS' instructions.
Is there an access panel to the MC that I am missing? How did the rest of you with this installed do this job?
Sorry to bother you for such a trival task, but I cannot get my hands well enough on the clutch master cylinder to even remove it.
AMS instructions state to remove the reservoir line AT THE MC. I can't even get my hands on it at the MC, let alone remove a clamp. I have the tranny and clutch/flywheel removed so access from the bottom is easy...yet I can't seem to contort my hands well enough to follow AMS' instructions.
Is there an access panel to the MC that I am missing? How did the rest of you with this installed do this job?
You have the Ecu and all that stuff out of the way right. I took the clamp off with a long skinny flathead screwdriver. After that you have to remove the line, It took all my strength to pull it off, lol. I keep telling everyone the clutch install was easier than this. Goodluck.
