help please MAF problem
Thread Starter
Evolved Member
iTrader: (1)
Joined: Jun 2009
Posts: 614
Likes: 0
From: cherry point NC
help please MAF problem
So I am about to make myself look as retarded as i feel but here is what happened
I just did the underhood bushings, and when putting back in the stock intake i forgot to plug the MAF in. I drove about 100ft and saw service engine light. AP says high temp at intake and something else related to the MAF not being plugged in. Even before i saw the codes I knew what it was.
So i stopped plugged it in and the reset codes on my AP. The service engine light is still on and for the same codes. Any ideas?
I just did the underhood bushings, and when putting back in the stock intake i forgot to plug the MAF in. I drove about 100ft and saw service engine light. AP says high temp at intake and something else related to the MAF not being plugged in. Even before i saw the codes I knew what it was.
So i stopped plugged it in and the reset codes on my AP. The service engine light is still on and for the same codes. Any ideas?