https://www.evolutionm.net/forums/ev...-2011-gsr.html

Here is my Evo!

 

torque is what kills motors, keep it under 400 and you'll be sittin pretty

 

Any updates? Anxious to see how the BB FP Black performs compared the the standard one mentioned in this post.

 

i wanna see this on the dyno!!!

 

You dont need an afpr with the buschur double pumper?

 

any updates yet ???

 

Sick.. how does the FP Red compare to the FP Black?

 

you need to build your block/piston/heads. And your trans/transfer/diff. if not anything over 400hp/400tq will blow your car up.

 

oh yea?

 

im @ 400whp with a stock turbo so if you cant hit 500 with that turbo. you got bad tuners then hahahaha you should clear 500 easy i only have pretty much bolt ons and hittin 400.. ams intercooler, ams upper and lower piping, maperformance intake manifold (rev3) 70mm throttle body, ams down pipe 3in ams full exhaust 3in, kelford 272 cams was tuned by boostin performance.

 

Best Luck man
Waiting for results

 

https://www.evolutionm.net/forums/ev...-2011-gsr.html

Results!! I posted this link for a while now..

 

Also depends what dyno....

 

and you stayed with the 900 injectors?

 

Hope the block holds for u