I recently had to replace my rear diff and now that the new one is in, I want to bleed it. Is anyone familiar on how to bleed the rear diff without the MUT3 tool. I already bled the transfer case, by putting the car on jacks, turning it on, leaving it it neutral with the handbrake down and spinning the driver tire.

Anybody know how to bleed the rear diff?

 

The diff is drain and fill. Are you talking about bleeding the AYC/ACD system?

 

Correct - Bleeding the AYC through the two bleed valves on the rear diff.

 

Ive seen the diy somewhere on here. I think you put the car on jack stands and have someone turn the wheel while you work the bleeder with the key in the on position without the car being started.

 

The AYC/ACD use the same pump. Activate the pump and crack the bleeders.