Notices
Evo X Engine / Turbo / Drivetrain Everything from engine builds to the best clutch and flywheel.

What's broken?

Thread Tools
 
Search this Thread
 
Old Dec 6, 2018, 04:24 AM
  #1  
Newbie
Thread Starter
 
Dan0330A's Avatar
 
Join Date: Dec 2018
Location: Massachusetts
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
What's broken?

So I broke my car other night. 08 EVO X MR. Took a corner a little fast. As I straighten out gas was non responsive. Pulled onto side of the road. In drive and reverse it will not move. Idles fine, revs fine, starts fine. It will actually roll backwards in drive while hitting gas. If I start it in park it does not make any suspicious noises however if I put it in drive then park it makes a grinding screeching noise. Nothing is hanging underneath and boots are not torn on axel. Was not close to redline and wasnt smashing thru gears. Any ideas? I hope the axel is broken under boot and it's not the 10k SST tranny. Thank you for any input.
Old Dec 6, 2018, 06:04 AM
  #2  
EvoM Staff Alumni
iTrader: (3)
 
MinusPrevious's Avatar
 
Join Date: May 2008
Location: So.Cal
Posts: 7,704
Received 1,384 Likes on 1,317 Posts
Welcome, thanks for joining us on the boards

Yeah, something happened Time to put this on the lift & give it a visual

Could be all electronic, but due to the grinding noise, it maybe mechanical

Once up in the air, take some pics & report back

Old Dec 6, 2018, 07:13 AM
  #3  
EvoM Community Team Leader
 
Biggiesacks's Avatar
 
Join Date: Aug 2005
Location: West Coast
Posts: 5,688
Received 704 Likes on 592 Posts
sounds like the trans, which should throw codes. Hit up Kozmic Motorsports, they have been very helpful and responsive when I have bounced questions off them.
Old Dec 6, 2018, 05:14 PM
  #4  
Newbie
Thread Starter
 
Dan0330A's Avatar
 
Join Date: Dec 2018
Location: Massachusetts
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
No codes. It's at a shop now just praying it's not the quite pricey SST tranny
Old Nov 26, 2023, 01:53 PM
  #5  
Newbie
 
VictorA's Avatar
 
Join Date: Nov 2023
Location: Utah
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Dan0330A
No codes. It's at a shop now just praying it's not the quite pricey SST tranny
what ended up being the issue? I’m having a similar problem with my ralliart




All times are GMT -7. The time now is 07:08 AM.