Brewster's X Hopefully Done...
 

Fresh of the lot,

http://a.imageshack.us/img91/9448/ds...small29xp5.jpg

Uploaded with ImageShack.us


First mods were Harman Motive UPIC, Harman Motive CAI, and a Buschur bullet catback.

Tuned But encountered some fuel problems. Sad Numbers. Don't have First dyno sheet.

Next came my Rota G-Force tires And Eibach Pro Kit.

http://a.imageshack.us/img8/7619/dsc03926medium.jpg

Uploaded with ImageShack.us


Well those mods didn't last long.

Followed by:

FP Red, UR's high flow fuel filter, Walbro 255 kit, AMS Widemouth Downpipe, UR Test pipe, & 1000CC DeatschWerks fuel injectors

http://a.imageshack.us/img42/9918/dsc04726.jpg

Uploaded with ImageShack.us

Tuned on 91:

http://a.imageshack.us/img15/7887/dynosheetj.jpg

Uploaded with ImageShack.us


I drove it like this for a while, then went back for E85 Tune:

http://a.imageshack.us/img208/9709/dyno2.jpg

Uploaded with ImageShack.us

Clutch went while on the dyno.

ACT 6 Puck came next.

Followed by

Blouch Wastegate Actuator

http://a.imageshack.us/img844/8498/img0793z.jpg

Uploaded with ImageShack.us

& GrimmSpeed 3 Port Electronic Boost Control Solenoid

http://a.imageshack.us/img832/8833/img0791i.jpg

Uploaded with ImageShack.us

And yet another E85 tune.
Tuned at 26lbs with emphasis on keeping the torque down.

http://a.imageshack.us/img203/6366/dyno3.jpg

Uploaded with ImageShack.us


Throw in a few show mods.

Alpine DD deck, AEM Wideband, Boost guage, a splash of 3M dinoc

http://a.imageshack.us/img227/1852/img0724small.jpg

Uploaded with ImageShack.us

http://a.imageshack.us/img251/3013/afru.jpg

Uploaded with ImageShack.us

http://a.imageshack.us/img839/8224/afrback.jpg

Uploaded with ImageShack.us




Some 265/35/18's Nitto NT-O5's


And that's it.

http://a.imageshack.us/img153/4139/img0710small.jpg

Uploaded with ImageShack.us


http://a.imageshack.us/img687/3139/img0707small.jpg

Uploaded with ImageShack.us


http://a.imageshack.us/img153/1452/img0719small.jpg

Uploaded with ImageShack.us

Absolutely awesome man. Nice job on the list of parts!

wow this thing is awsome...love the 3m touch. Was it difficult to wrap everything with no crease's or air bubbles??? Im contemplating doing it myself

Looks aggresive , I like it nice job.

Very clean, I'm liking your build. Hopefully mine will be along those lines. You should get a bigger FMIC and be done. :) :thumbup:

Just get some extra and use a heat gun, it is pretty easy.


I know I should, but they are a spendy part.:(

Cams and IC, then your done.

nice lookin X you got

Nice build man, great numbers to. +1 for FMIC and cams {thumbup}

Car looks good. So does the Grain Belt Premium. We can't get that beer out here in Portland Oregon but relatives alway bring it when they come to visit from MN.

nice build and nice numbers
have you thought about adding some spacers? in the pics the wheels loook like they could be a little more flush

-anthony

Seeing as you are just a bit under what i was running for HP, I would say stay away from the MX1's for cams if you do cams. I had them and I made more or less no more HP then you, lol. And I was at 33psi tapering to 27ish. Sucks for my setup before, haha.

E85 with an FP Red must be quite a rush!

Get some GSC stage 1 cams, and a front mount. You'll pick up a considerable amount of power.

Lookin good. I wanna see how fast it is :p