Evo X and Lancer L.E.D.s
Thread Starter
Former Vendor
iTrader: (107)
Joined: Sep 2004
Posts: 4,364
Likes: 0
From: A.K.A. DaFarmer
Evo X and Lancer L.E.D.s
I finnally starting getting the new cars led'd.
https://www.evolutionm.net/forums/sh...97463#poststop
If anyone has ideas please feel free to let me know. I am open to any suggestions or comments good or bad.
Here are a few of my favorites. Click images. I love white.
Stupidily bright front and rear dome lights. 192 leds.


White H.I.D, White turn signal, White fog light, and White parking light. Everything matches.


https://www.evolutionm.net/forums/sh...97463#poststop
If anyone has ideas please feel free to let me know. I am open to any suggestions or comments good or bad.
Here are a few of my favorites. Click images. I love white.
Stupidily bright front and rear dome lights. 192 leds.


White H.I.D, White turn signal, White fog light, and White parking light. Everything matches.


Thread Starter
Former Vendor
iTrader: (107)
Joined: Sep 2004
Posts: 4,364
Likes: 0
From: A.K.A. DaFarmer
The factory tails suck ***. They are a pain to get off, then when they do let go they take the body with them It was a poor *** design.
Lucilky I didnt break this one, the customer did, but 2 of us trying for a half an hour to get them off and one finally let go. Here is what happened when one did. I could not get the pass. side off. I fixed the chip for him to where its not noticable and I had to reglue the body back together also. Pinstriping them is a improvement. I forsee alot of people breaking them when they take them off.
I am going to try to get the bigger companies to make housings for me since these factory ones will not come apart like the 8 tails.
Click images.




Lucilky I didnt break this one, the customer did, but 2 of us trying for a half an hour to get them off and one finally let go. Here is what happened when one did. I could not get the pass. side off. I fixed the chip for him to where its not noticable and I had to reglue the body back together also. Pinstriping them is a improvement. I forsee alot of people breaking them when they take them off.
I am going to try to get the bigger companies to make housings for me since these factory ones will not come apart like the 8 tails.
Click images.




Last edited by Curt@MrLed; Jun 20, 2008 at 02:29 PM.
Trending Topics
Thread Starter
Former Vendor
iTrader: (107)
Joined: Sep 2004
Posts: 4,364
Likes: 0
From: A.K.A. DaFarmer
Baking doesnt ork. They have to be dremaled. But due to the way its made it will be a real pain to glue back together.
Thread
Thread Starter
Forum
Replies
Last Post
Curt@MrLed
Evo X Vendor 'For Sale' Classifieds
27
Aug 21, 2008 12:58 PM




