take the tap off, go to LOES and get these

 

Looks neutered.

 

what kind of plugs are those and what size?






I wonder if the X is the same as the VIII and IX, where if water got in through the holes, its routed outside and water doesnt get in.. Can anyone confirm this?

 

just go into a Loes and tell them what you need them for, not sure of the sizes casue i bought a bunch of them to make sure i got the right size...

 

/
are these rubber or plastic? What section of lowes did you find them at? Do you remember by any chance the closest size? Thanks

 

love wingless

and im also inyerested in the lowes hole plugs

 

diddo.

 

looks like a shaved monkey...not that its a bad thing.

 

they are plastic, na man i dont remember the section or the size but just ask someone that works there, they are really cheap so you will be able to buy a bunch like i did .

 

 

needs the wing. looks like crap without it. especially with holes in the trunk of a $35k car

 

Go and buy a GG evo 8 or 9 wing and put that bad boy on.

 

Put the wing back!

 

somebody should photo shop an 8 or 9 wing on there to see how it looks.

 

how did you get the rectangular grommet out? I tried pulling on it, but it's really hard to get a good grip on that thing. I also didn't want to accidentally scratch the paint.

So far, I've got 2 of the holes plugged with the plastic plugs from lowes. You can find them in the hardware section where they have all the drawers with the bolts and stuff. I used 5/16" for the two on the outer edge, but couldn't find one to fit the threaded hole (inner hole towards the back glass).