Official Evo X interior and dash picture thread!
 

Credit to Eggy for coming up with this idea in the 1-9 forums!

Took this from the evolution 1-9 forums and figured it would be a great idea for the X forums since i haven't seen nor found any.

Probably a good idea to start an official thread about pictures ... with pictures. Theres quite a few threads regarding interior setups, but no "official" one. I am interested tho, lets see what everyone has done in a consolidated fashion.

Ya definitely would be nice to have a single location to see what peoples interiors look like.

1.CF Fabric
What you need:
-CF Fabric http://m3forum.net/m3forum/showthread.php?t=244952
-3M™ Super 77™ Multipurpose Adhesive
-Olfa blades

http://www.shrani.si/t/1c/Bi/31s1s6pD/foto045.jpghttp://www.shrani.si/t/3X/TD/49OJxcR4/foto050.jpghttp://www.shrani.si/t/2f/MH/4PgLKBgO/foto051.jpg http://www.shrani.si/t/2i/IR/3FtxgeV...onzola0003.jpg

2.New LED light for rear trunk
http://www.shrani.si/t/3s/e1/2EtoxPNG/foto123.jpg http://www.shrani.si/t/3e/8w/2puQU0h5/foto127.jpg

3.Install Pioneer AVIC-Z110BT

http://www.shrani.si/t/1s/gi/2TONTDow/untitled-7.jpg

http://www.youtube.com/watch?v=xr0r3JuWZUk

http://i890.photobucket.com/albums/a.../Foto226-1.jpg
Attachment 292470
Attachment 292471

4.For :beer:
http://www.shrani.si/t/C/GJ/4kmMDn33/foto064.jpg

5.Made Cam holder I use for a track day
http://www.shrani.si/t/38/K3/3x1JBg6K/file0009.jpg

6Gauge
http://www.shrani.si/t/b/GO/3eHGGHqG/foto366.jpg http://www.shrani.si/t/2g/Ra/2Bu00wjt/foto378.jpg

7.Paint Recaro
http://www.shrani.si/t/3j/gp/2PaucDWy/foto380.jpg

8.Because is in the reat trunk to much plastic I do this.
http://i890.photobucket.com/albums/a...ez/Foto382.jpg
Attachment 292472

I always wondered if someone painted those harness slots on the Recaro's. Nice work.

what kind of paint did you use to paint the recaro harness slots.

1,First I wash the harnes slots with hot watter,then dry.
2.Then I take sanpaper (800) and light everything with sandpaper under the running water, then dry.
3.I take Plastic Premier spray and made two thin coat.Wait 5-6 hour beetwen coat to dry.
4.Then I smooth it by slightly wet sanding it with 1200-1500 sandpaper ,clean ewrything with watter and dry.
5.Then I take acrylics spray and made three thin coat with silver colour.Wait beetwen coat 24 hours.

[B]Betveen each coat you must wash harnes slot.
Why?

As part of the paint on the road to the housing of the spray dried in the air and fell on
housing as the dust - it is not grabbed by the housing and so the next coat of paint will not be touched in this dust.[/B]

Sorry for my English is so so.

Do the harness slots come off easily? Do you have a DIY on how to take it off the car?

Yes come off easilly but I suggest that you do this when is outside warm ,beacus the plastic clips don t broke.I ll made DIY wiht a picture.

yes please post a picture on how to take it apart

Need step by step instrutions pretty please? would love to do this but have no clue how to even take off the door trim. not very handy...

How to take off and paint harnes slot from Reccaro seats.

1.As the first you must do this when is in the car hot, then plastic pins will not broke.Put your fingers as shown in the picture on both sides of the harness slots and pull slowly in the direction as shown by the arrow.You need to pull with some forces.
Attachment 292451
Attachment 292452
Attachment 292453

2.Two pices of harness slots.

Attachment 292454


3.Painting plasticsThese proces may vary. I use this proces:
Attachment 292455

1,First I wash the harnes slots with hot watter,then dry.
2.Then I take sanpaper (800) and light everything with sandpaper under the running water, then dry.
3.I take Plastic Premier spray and made two thin coat.Wait 5-6 hour beetwen coat to dry.
4.Then I smooth it by slightly wet sanding it with 1200-1500 sandpaper ,clean ewrything with watter and dry.
5.Then I take acrylics spray and made three thin coat with silver colour.Wait beetwen coat 24 hours.
Betveen each coat you must wash harnes slot.
Why?
As part of the paint on the road to the housing of the spray dried in the air and fell on
housing as the dust - it is not grabbed by the housing and so the next coat of paint will not be touched in this dust.

4.When you are done with painting,you put back harness slots to the seats. ,
Attachment 292456

5.And this is the result.Then you deserve one :beer:
Attachment 292457
Attachment 292458

I think is here:
https://www.evolutionm.net/forums/ev...rim-evo-x.html

have you done the back door trim? same method of removing?

To remove is the same,but back door don t have this panel.