I've been reading the forums for some time now but I thought it's time to join in on the conversations. I ran several searches but couldn't find a clear answer.

My problem is I want to change all my lights and I was able to change the headlights, front and side turn signals, front parking lights (being a girl with small hands help!!) but I cannot remove the rear tail lens. I took out both screws and the lens will not slide off. I'm afraid to crack the lens so I do not use alot of pressure. Any advice would be appreciated.

Thanks

 

After both screws are out pull out the whole light. PUt on hand next to the where the screws were and one on the other side and just pull. once it's out find the right bulb you want and turn the bulb plug on the back of the light to the left i think, pull it out gently and change the bulb. ANd they put it back together. As far as having small hands that should work to your benefit in the front just sneak your hands in and turn the bulb plug and gently slide it out.

 

it just need a lil tugging to pull the whole light out...
...its not going to crack...

 

it sound like it is going to crack but damn thing is sturdy just give it a good tug and you will take it out with out any problem

 

It's true don't worry about breaking them they'll pop right out.