My evo was involved in a good front end collision. I have a donor car to repair mine. I have matched the ecu with column. All the air bag sensors and control modules are good. Also so are the impact sensors. I have hooked up a matco scan tool and read the codes at first I had all the codes from the accident then I cleared the codes. Now the only codes that I am getting are the seatbelt tensioners are bad I know that because they are locked in place. I am not getting the fuel pump to come on and I'm not getting any spark either! I do know that on some newer cars there is a safety mechanism in the tensioner that will not allow the engine to restart I am not sure if the evo is so equipped? I am currently going over the entire car to check fuses ,grounds and relays. I am really stumped anyone have any ideas??????????????? any othe reasons or ideas would really help thanx!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!

 

I love this thread,i just purchased a wrecked 03 evo and it was hit in the front too.im having the same problems.been over everything,got a new module and airbags on the way .Do i have to replace impact sensors after bags deploy?Hope we find somthing out

 

Will someone help us out?Or point us in the right direction. Thanks

 

I got car running now thanks everyone for your help!!!!!!!!!!!!!!!!!!!!!!!

 

What was wrong with it?Just curious.

 

Well actually we had the had the dash apart. And of course it was one of the hardest things to find just a single solitary ground wire not grounded!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!! so needless to say I was PISSED and Pleased all at once!!!!!!!! If you have any questions feel free to email me or post them.