Guys, I have a question- I recently installed my ACT Street Disc (first aftermarket clutch)...at first It felt like the stock clutch but today (a few weeks later), there is no response until the clutch is about an inch from the ground (and catches at that point too)...Until it's pressed that far in, the pedal has hardly any tension until the catch point. Do I need to adjust the clutch or is this normal? The thing that is weird to me it wasn't like this until a month later...Anyone?

 

Update:

I was going to try adjusting the pedal, took the car for a drive & now the clutch just sticks to the floor just like it did before I replaced it. I've had the ACT in for about 1,500 miles and let it break in for 400 miles before pushing it even remotely hard.

??

::EDIT:: Going to the store to buy an 8mm wrench and hopefully get this done tonight.

 

when i replaced my clutch , i also replaced the clutch line ,and had to rebleed the system, dont know about the older cars but my 9 there is no clutch fluid resevor it pulls fluid from the brake res , but the res has to be full cause the clutch master cyl only pulls fluid from the top of the res, i just let it gravity bleed and keep the res full at all times cause it only pulls fluid from the top 1/4 of the res for saftey sake i.e. a clutch line leak ,ect hope this helps

 

thanks!