New to the forum here, sort of.
New to the forum here, sort of.
Hey guys, I've been around somewhat, but only recently have I registered. I trolled the market place for quite a while, and just figured I'd introduce myself.
I've got two Mirages back home.
One is a sedan that has:
Performance
-2.0 single cam O.Z. Engine
-Block has 30,000 mileage, re gasket and sensors
-Stock internals, 12psi max
-Top mounted turbo kit
-Front mount intercooler, no piping
-Spec light weight flywheel, new
-Spec stage III clutch, new
-Tein Full coil over Special ordered from Tein Japan, new
-Needs MAF 03 O.Z.
-Have uncut engine harness, bay fuse box, needs a little adaptation
-All mechanics are fully installed, 100%
-Needs brake ware parts other wise 100% working
-Exhaust re piping needed
Exterior
-Fully complete and molded wide body Evolution V body
-JDM Evolution V front bumper
-JDM Evolution V rear bumper
-JDM Evolution V side skirts
-JDM Evolution V hood
-JDM Evolution V metal trunk
-JDM Evolution V taillights
-JDM Evolution V spoiler
-JDM Evolution V one piece head lights, new
-Veilside one piece mirrors with blue or clear lens, new
-Fog lights fitted for body
-Side marker lights, new
-Ready for paint
-Rolling chasse
Interior
-Full custom Sparco Blk/Silver interior, no ft/pass seats
-JDM km cluster, rare
-Cusco 6 point roll cage, never installed, new
-Custom Apex installed turbo timer
-Momo Steering wheel hub
-Battery relocation kit installed
It is in the shop right now getting a few things completed;
-ECU wiring
-Intercooler piping/turbo back exhaust
-Sparco Torino seats (interior matches the white/black Torinos)
-Paint
The other is a coupe with the following:
-ViS OEM CF hood
-AUDM one-piece headlights
-JDM Evo V/VI tail lights
-Dropzone springs
-KYB GR-2 struts/shocks
-Upper strut bars
-Lower tie bars
This is waiting to go into my friend's shop in a couple weeks, where it will undergo the following:
-Evo IV 4G63 (which is being pulled apart beforehand, and I'm looking at building with aftermarket parts, if the wallet allows it)
-Converting from FWD to AWD (need to know some things about interchangeability of parts between the IV-IX)
-ViS Evo CF trunk w/Evo V/VI reflectors
Probably more, but I can't think of anything at the moment.
Oh yeah, name's Mike, and I'm in the military stationed in Okinawa, Japan.
I've got two Mirages back home.
One is a sedan that has:
Performance
-2.0 single cam O.Z. Engine
-Block has 30,000 mileage, re gasket and sensors
-Stock internals, 12psi max
-Top mounted turbo kit
-Front mount intercooler, no piping
-Spec light weight flywheel, new
-Spec stage III clutch, new
-Tein Full coil over Special ordered from Tein Japan, new
-Needs MAF 03 O.Z.
-Have uncut engine harness, bay fuse box, needs a little adaptation
-All mechanics are fully installed, 100%
-Needs brake ware parts other wise 100% working
-Exhaust re piping needed
Exterior
-Fully complete and molded wide body Evolution V body
-JDM Evolution V front bumper
-JDM Evolution V rear bumper
-JDM Evolution V side skirts
-JDM Evolution V hood
-JDM Evolution V metal trunk
-JDM Evolution V taillights
-JDM Evolution V spoiler
-JDM Evolution V one piece head lights, new
-Veilside one piece mirrors with blue or clear lens, new
-Fog lights fitted for body
-Side marker lights, new
-Ready for paint
-Rolling chasse
Interior
-Full custom Sparco Blk/Silver interior, no ft/pass seats
-JDM km cluster, rare
-Cusco 6 point roll cage, never installed, new
-Custom Apex installed turbo timer
-Momo Steering wheel hub
-Battery relocation kit installed
It is in the shop right now getting a few things completed;
-ECU wiring
-Intercooler piping/turbo back exhaust
-Sparco Torino seats (interior matches the white/black Torinos)
-Paint
The other is a coupe with the following:
-ViS OEM CF hood
-AUDM one-piece headlights
-JDM Evo V/VI tail lights
-Dropzone springs
-KYB GR-2 struts/shocks
-Upper strut bars
-Lower tie bars
This is waiting to go into my friend's shop in a couple weeks, where it will undergo the following:
-Evo IV 4G63 (which is being pulled apart beforehand, and I'm looking at building with aftermarket parts, if the wallet allows it)
-Converting from FWD to AWD (need to know some things about interchangeability of parts between the IV-IX)
-ViS Evo CF trunk w/Evo V/VI reflectors
Probably more, but I can't think of anything at the moment.
Oh yeah, name's Mike, and I'm in the military stationed in Okinawa, Japan.
I have a few, nothing extremely recent though, being overseas:
Here's how the V looked before they went to work on it:

Parts in it and engine pictures:











As for the coupe, this is all I have currently:



As you can see, the rear quarter is faded like crazy (as are the trunk and roof), forgot to mention she'll be undergoing a color change as well. Also have a lip kit for it that will be going on.
And currently, both are rimless, but that will change as soon as I get them back on the road.
Here's how the V looked before they went to work on it:

Parts in it and engine pictures:











As for the coupe, this is all I have currently:



As you can see, the rear quarter is faded like crazy (as are the trunk and roof), forgot to mention she'll be undergoing a color change as well. Also have a lip kit for it that will be going on.
And currently, both are rimless, but that will change as soon as I get them back on the road.


