Notices
EvoM New Member / FAQs / EvoM Rules New member? Come on in, introduce yourself, and get acquainted with the evolutionm.net posse :) FAQs will also be answered in here.

what should my hp be at???? guessing

Thread Tools
 
Search this Thread
 
Old Nov 23, 2008 | 07:38 PM
  #1  
evo9ben's Avatar
Thread Starter
Evolving Member
iTrader: (13)
 
Joined: Jul 2008
Posts: 294
Likes: 0
From: Portland OR
what should my hp be at???? guessing

i was wondering what my hp would be with the mods i have + meth.

i have ecu flash
tune
ported header
turbo back exhaust cat less megan racing
downpipe megan racing
ic piping and cold air intake injen
cooling mist meth stage one with 1gal tank and 150psi pump
29psi tune or whats the max psi possible i have a 06 evo 9 mr se with stock turbo and i was wondering with a fresh tune what my hp rating should be around thanks ..
Reply
Old Nov 23, 2008 | 11:58 PM
  #2  
TKEVO's Avatar
Evolved Member
Veteran: Air Force
iTrader: (43)
 
Joined: Jun 2007
Posts: 580
Likes: 0
From: Rio Rancho
Hmm hard to tell. So just a few bolt ons and meth?
Reply
Old Nov 24, 2008 | 12:07 AM
  #3  
magyar86's Avatar
Evolving Member
iTrader: (10)
 
Joined: Jan 2007
Posts: 376
Likes: 0
From: league city, texas
hellcat has about the same mods as you runnin 30psi and put down in the 370's on a mustang dyno. but to be on the save side i would say 350's and if you get more then you would be happier then if your goal was 370's and you only put down 350's....if that makes sense...but the main thing is going to be the tune..
Reply
Old Nov 24, 2008 | 10:17 AM
  #4  
Creamo3's Avatar
Evolved Member
iTrader: (48)
 
Joined: May 2003
Posts: 2,078
Likes: 2
From: Chicago
How is this a dyno tuning and results thread?
Reply
Old Nov 24, 2008 | 10:33 AM
  #5  
TURBOSINGLE's Avatar
Newbie
 
Joined: Jan 2008
Posts: 0
Likes: 0
From: ft. lauderdale
Smile please help, low numbers? 325hp, 328tq

just got off the dyno at machines gone wild , after cam install, turned out best run 322hp & 328tq at 21psi after about 3hrs of tuning 76F ambient temp.

mods
full 3' tbe w/ housing & test pipe
gsc s1 cams
apexi short ram intake
stock turbo
custom tune
2005 gsr 2.0

could you guys please tell me if this is about normal.
I didn't bleed the lifters during cam install
should I do a compression check?
possible loose timing belt

the car made 306hp,300tq before the cam install same mods
Reply
Old Nov 24, 2008 | 11:23 AM
  #6  
scheides's Avatar
EvoM Moderator
iTrader: (10)
 
Joined: Oct 2006
Posts: 4,827
Likes: 13
From: Minneapolis
This thread does not belong in this section.
Reply




All times are GMT -7. The time now is 07:00 PM.