Hey I recently got some Evo X MR BBS wheels and was wondering if anyone had the lug nut specs on hand.

I know the pitch is 1x1.5 but i wanted to know the shank size, the diameter, how deep they are and the taper angle.

 

Shank width, and depth would be greatly appreciated. Also the washer diameter would be great.

 

All I can really take from this post is you bought stock wheels? If so you can't mix aftermarket lug nuts with stock wheels or vice versa. If you bought aftermarket wheels, all of this you are asking is invalid. As far as the shank size, diameter, how deep and taper why do you need to know this? When you buy lugnuts they are just sold by pitch usually, 1.25 or 1.5. Of course you can get different lengths, but that's preference and extended threads. For the washer, you don't need one for aftermarket wheels. Stock wheels are not tapered so you need one for them. The taper should be 60 degrees. If you really need shank size you can measure your shank on your car, and diameter, lug nuts are 17, 19 or 21mm.