![]() |
how to know if you're cammed?
I bought a used 03 evo with 37k on the ODO
so far I found RMR intake forge dv (which is TOO LOUD!) exhaust system which I can barely here and don't know the brand. The car vibrates a tiny bit at idle and the idle is right under 1000 rpm. it there any way to know if it's cam'd easily? |
take off the valve cover?
|
listen to the idle, or take off the cam gear cover and see if you have cam gears. most evo8s would also have cam gears
|
Originally Posted by BigBallin
(Post 5093127)
listen to the idle, or take off the cam gear cover and see if you have cam gears. most evo8s would also have cam gears
thanks. i wouldnt thinking take the valve cover would help cuz I wouldn't be able to compare lobes. in the honda world some of the cams had stamps on the end and a cam seal could be removed. |
well In Mitsubishi world we have hollow stock cams shafts that have holes in them.. So if you take the valve cover off you will be able to tell..
|
Hit the gas pedal and see if the car feels like it's bad ass.
|
mistake 1 was buying a used evo
|
Pull the value cover off and look for aftermarket cam gears. Most ppls. switch when installing cams.;)
|
Originally Posted by igo4bmx
(Post 5092990)
I bought a used 03 evo with 37k on the ODO
so far I found RMR intake forge dv (which is TOO LOUD!) exhaust system which I can barely here and don't know the brand. The car vibrates a tiny bit at idle and the idle is right under 1000 rpm. it there any way to know if it's cam'd easily? Something is wrong if you are idling around 1k. does your idle sound like a v8 idling? |
actually alot of people dont swithc cam gears and what would be the point of taking the valve cover of to look at cam gears???? Take the valve cover off and look at the cams i can give you pics of how the stock ones look and you can compare to the ones you have or if your in philly im in Brlington, NJ which is abotu 30 minutes from philly, worst comes to worst you can stop by here and ill tell you if it has cams or not
|
Originally Posted by saiyanzzrage
(Post 5093893)
mistake 1 was buying a used evo
|
Originally Posted by Silver05Bullet
(Post 5093933)
actually alot of people dont swithc cam gears and what would be the point of taking the valve cover of to look at cam gears???? Take the valve cover off and look at the cams i can give you pics of how the stock ones look and you can compare to the ones you have or if your in philly im in Brlington, NJ which is abotu 30 minutes from philly, worst comes to worst you can stop by here and ill tell you if it has cams or not
the car does not sound like a v8, but i've seen mild honda cams barely do anything to the sound and idle. my built honda sounds like a diesal motor however lol |
Originally Posted by igo4bmx
(Post 5094085)
Solution- warranty purchased
good luck getting that warranty honored if something goes wrong, they tear down your motor and find aftermarket cams. |
My car idles at 900-1000 rpm, and sounds a little lopey. Pretty sure its stock though. Evos have a pretty high duration cam from the factory don't they? I sure hope I don't have cams, I REALLY need to learn how to drive if I do. You could take it to the track and see what you trap at.
|
Mine are stock and my car never idels at 900-1000 unless its on a richer warm up fuel map even then i dont think its that high.
|
| All times are GMT -7. The time now is 12:45 PM. |
© 2026 MH Sub I, LLC dba Internet Brands