new "again" from texas
#1
Evolving Member
Thread Starter
new "again" from texas
picked up my 3rd evo
first one was stock evo 9 turbo
second one built 6466 730+ hp
this one here is some of the info
2.4 Evolution Dynamics motor ( cp pistons/upgraded wrist pins, acl race main bearings, manley TT rods, acl race rods)bearings, arp main studs
-Built Sheps 5 speed trans
-Stage 5 Competition clutch
-FP Red turbo kit external gated with heat shield
-BC 272 cams
-ETS piping with Tial bov
-FIC 1200cc injectors
-Buschur double pumper
mitshimoto rad with spal fan
3 inch exhaust
jdm rear end
dyno sheet I was given puts it at 566/506 on e85
recently fixed an issue with temp gauge and temp, the car was missing the ground from body to intake manifold and that fixed the issue with gauge
replaced rad with a mishimoto one a friend had from his evo he sold with a nice big spal fan so got those. spal one evo came with looks new but smaller ill have it for sale soon.
changed out the thermostat , shifter to OEM one ,turbo filter, oil, plugs and added a spark plug cover since It didn't come with one, exhaust it was pretty much open downpipe, and ac fan
also put a new wideband sensor since one it had went bad.
have a cam sensor heat shield In the mail I need to go get it and a coolant reservoir my friend gave me for free, I need to paint it and get it on .
waiting on carlos at TCC here in tx to do a set of calipers for me and replace the ones on the car that look like straight CRAP lol.
need to order an oil cooler since it don't have one.
here are a few pics to start with
this knob is for sale ^
first one was stock evo 9 turbo
second one built 6466 730+ hp
this one here is some of the info
2.4 Evolution Dynamics motor ( cp pistons/upgraded wrist pins, acl race main bearings, manley TT rods, acl race rods)bearings, arp main studs
-Built Sheps 5 speed trans
-Stage 5 Competition clutch
-FP Red turbo kit external gated with heat shield
-BC 272 cams
-ETS piping with Tial bov
-FIC 1200cc injectors
-Buschur double pumper
mitshimoto rad with spal fan
3 inch exhaust
jdm rear end
dyno sheet I was given puts it at 566/506 on e85
recently fixed an issue with temp gauge and temp, the car was missing the ground from body to intake manifold and that fixed the issue with gauge
replaced rad with a mishimoto one a friend had from his evo he sold with a nice big spal fan so got those. spal one evo came with looks new but smaller ill have it for sale soon.
changed out the thermostat , shifter to OEM one ,turbo filter, oil, plugs and added a spark plug cover since It didn't come with one, exhaust it was pretty much open downpipe, and ac fan
also put a new wideband sensor since one it had went bad.
have a cam sensor heat shield In the mail I need to go get it and a coolant reservoir my friend gave me for free, I need to paint it and get it on .
waiting on carlos at TCC here in tx to do a set of calipers for me and replace the ones on the car that look like straight CRAP lol.
need to order an oil cooler since it don't have one.
here are a few pics to start with
this knob is for sale ^
Last edited by Eric SlowEvo8; Aug 16, 2017 at 10:16 AM.
#4
Former Sponsor
Great upgrade! Congratulations and enjoy. If you ever have any questions or need assistance with finding parts for your Evo, let us know we will be glad to help you!
#5
Evolving Member
Thread Starter
-2.4 Evolution Dynamics motor...
-Built Sheps 5 speed trans
-Stage 5 Competition clutch
-FP Red turbo kit
-BC 272 cams
-ETS piping with Tial bov
-FIC 1200cc injectors
-Buschur double pumper
-Mickey Thompson Street Comp 245/45
Map Stage 2 brake kit
Dual Maps 93/e85
still on a maf but ill be going SD along with adding exhaust to it today it was a short pipe on it and its too loud
also ordered a cam sensor cover for it and new key remotes.
-Built Sheps 5 speed trans
-Stage 5 Competition clutch
-FP Red turbo kit
-BC 272 cams
-ETS piping with Tial bov
-FIC 1200cc injectors
-Buschur double pumper
-Mickey Thompson Street Comp 245/45
Map Stage 2 brake kit
Dual Maps 93/e85
still on a maf but ill be going SD along with adding exhaust to it today it was a short pipe on it and its too loud
also ordered a cam sensor cover for it and new key remotes.
Trending Topics
#9
Evolving Member
Thread Starter
got an exhaust on it, changed the thrermostat, oil, bigger rad fan with an upgraded radiator, spark plugs, added spark plug cover, new wideband sensor and got sent a pic when I was spotted
also car was missing a ground so added that to and my temp sensor issue of bouncing all over seems to be fixed.