Notices
General Engine Management / Tuning Forum Discuss general EMS tuning concepts that do not pertain to a specfic brand or product.

i need help

Thread Tools
 
Search this Thread
 
Old Mar 8, 2005 | 03:16 PM
  #1  
ballinnuts's Avatar
Thread Starter
Newbie
 
Joined: Feb 2005
Posts: 20
Likes: 0
i need help

I have a 2003 evo. I am running around 22psi and i keep hiting fuel cut. I need some advice on parts to put on to keep this from happening. I am fairly new at the whole turbo thing. I have a full hks exhaust and down pipeand a high flow cat. I also have a boost controller and intake. Just a few of my mods . If anybody could help i would appreciate it.
Reply
Old Mar 8, 2005 | 08:08 PM
  #2  
Karash's Avatar
Evolved Member
iTrader: (6)
 
Joined: May 2003
Posts: 1,274
Likes: 1
From: Okie in PHX
Do you have a Apexi Power FC or is this in the wrong forum?
Reply
Old Mar 10, 2005 | 12:44 PM
  #3  
ballinnuts's Avatar
Thread Starter
Newbie
 
Joined: Feb 2005
Posts: 20
Likes: 0
I put in on the wrong forum and didnt realize it till after. But if you got any ideas anything would help.
Reply
Old Mar 12, 2005 | 07:12 AM
  #4  
robertrinaustin's Avatar
Evolved Member
iTrader: (5)
 
Joined: Dec 2003
Posts: 1,858
Likes: 0
From: Work - New York, Alaska, Mexico or the Caribbean. -Home - Tx Hill Country
I would look at a flash from one of the vendors on EVOm. I think they all eliminate fuel cut.
Reply




All times are GMT -7. The time now is 10:34 AM.