before my batt died, the fc was working fine. now since I have relocated the batt to the trunk, and bought a new starter my car has problems cranking with the pfc. cranks and runs fine with the stock ecu though. is there a way to adjust the startup?? will update with the settings that are in the pfc.

sympoms: turn over, starter is good. slight catch when started. struggles at about 300rpm then dies. I've adjusted the injectors and gone through all the options of not starting.

running on stock ecu for now with 1000cc inj. stock fpr,perrin fuel rail, gt35r, jmf intake manifold.