So last weekend I replaced my plugs with BPR7ES since #4 was fouled. This week ended up fouling #4 again, so I'm thinking plug wires. Searched around on here and what I have read is just use the stock plugs.

So i called up Napa to see if they had some more BPR7ESs in stock and while I had them on the line, I asked them what they had for wires. They said that they have NGKs p/n 8910 for $33 and Beldens (their 'premium' wires) for $45. I have not seen anything on the NGKs.. has anyone used these and can enlighten me on the topic
thanks in advance!

 

FYI - NGK ME96 wires do not fit Evo IX

Bought some and tried it.

Sparkplug rigid black plastic boots are too long to work.

About 1.5" / 38mm too long.

Look like good wires, but no go.

Mitsuatb