Notices
General Engine Management / Tuning Forum Discuss general EMS tuning concepts that do not pertain to a specfic brand or product.

Question on my tuning has this happend to u!

Thread Tools
 
Search this Thread
 
Old Feb 22, 2009 | 09:48 AM
  #1  
03evokid's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jan 2009
Posts: 140
Likes: 0
From: ATL
Question on my tuning has this happend to u!

Ok so im getting my car road tuned and we ran into a slight promblem! I installed a warbro, o2 dump, 280 cams and intake..... Well when we log it, the front o2 is reading like 10-1 im getting way more fuel then i should be... my tunner said to cheack for an exhaust leak b4 the first o2 but everything looks fine no leak!! Let me know what you guys think!
Reply
Old Feb 22, 2009 | 03:12 PM
  #2  
EVOIXreno's Avatar
Evolved Member
iTrader: (18)
 
Joined: Jun 2008
Posts: 541
Likes: 0
From: Reno,NV
Originally Posted by 03evokid
Ok so im getting my car road tuned and we ran into a slight promblem! I installed a warbro, o2 dump, 280 cams and intake..... Well when we log it, the front o2 is reading like 10-1 im getting way more fuel then i should be... my tunner said to cheack for an exhaust leak b4 the first o2 but everything looks fine no leak!! Let me know what you guys think!
Sensor could be going....did the tuner try and take fuel out and is he using a Wide band???
Reply
Old Feb 22, 2009 | 03:18 PM
  #3  
Jokeri's Avatar
Newbie
 
Joined: Nov 2004
Posts: 36
Likes: 0
From: Tellus
Do you still run with the same fuel pressure`??
Reply
Old Feb 22, 2009 | 04:09 PM
  #4  
a2stepawd's Avatar
Newbie
iTrader: (2)
 
Joined: Oct 2007
Posts: 56
Likes: 0
From: Chicago Heights 60411
TIghten down the exhaust manifold and everything else just in case. How old is the sensor? What does it read at idle?
Reply
Old Feb 22, 2009 | 05:42 PM
  #5  
Standing Z's Avatar
Evolving Member
iTrader: (58)
 
Joined: Jan 2009
Posts: 138
Likes: 0
From: Milwaukee
If you hear a ticking, then you have an exhaust leak. Dont confuse it with lifter tick though. But my guess is the o2 is going bad.
Reply
Old Feb 22, 2009 | 06:38 PM
  #6  
03evokid's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jan 2009
Posts: 140
Likes: 0
From: ATL
i got it guys when installing the fuel pump i put the plastic piece on top of the o-ring....its supposed to go under the 0-ring so it was sucking fuel but wasnt sealed in so i got it all fixed
Reply




All times are GMT -7. The time now is 01:54 PM.