Hey All.

I followed the guide on the forum to remove my ABS ECU on my evo 7. It says to ground pin 49 to the chassis so the ACD stops looking for the ABS computer and re route all the speed sensors. Ive routed all the speed sensors so thats fine but i grounded pin 49 and yet im still getting the ABS ECU Comms fault on the dash.

Is this a latched fault possibly? Pin 49 is definately down to earth yet im not able to clear this fault code.

Car is Evo 7 JDM spec with AYC but ayc has been removed from the car, Ralliart ACD ECU and ive also tried stock ACD ECU

Thanks

Brad