Ime confused, i logged today, and my fuel column, the one which lists the amount of fuel removed by utec, doesnt match the log. Know what i mean??? say at 7200 RPM the log line for fuel says -9.6. So i go to my map look up the RPM at the logged load and it says 9.2. Ime lost. I dont remember it like this before the 1.3 update. Or i could have missed it, but any ideas??? RRR

 

I'd say it was the smoothing between MLPs. Just like on the SAFC and most other piggy backs, the load points can't just make a hard switch between positions.

 

Yeah, its the smoothing effect.. remember that each MLP is in 10% increments.. so if your at 95% it'll be slightly lower than 100% and slightly higher than 90%

At least your not seeing bouncing MAF values.. that filter is driving me insane!