I have the Road Race Wiring Diagram and some wires from another post, but after looking at the wires coming out of my S-AFCII I found that I will have three wires left over. I will have a yellow, a white and a blue wire coming from the S-AFCII with no where to conect the wires to the ECU. If I could get some help on this that would be great here is the wire and pin placements that I have at this moment:

Power (red)- pin 25
Ground (brown)- pin 13
Ground (Black)- pin 26
RPM (green)- pin 58
TPS(Grey)- pin 84
Airflow signal out(pink)- pin 79
Airflow signal in(orange)- pin 90
Konck Sensor(purple)- pin 78

Any help would be great

 

i hope this may help


http://www.lancerevoclub.com/piedinaturaecu-e.htm

if you need any more help please do not hesetate to contact me

sultan