Notices
JapanParts.com – Tokyo [Visit Site]

Front air dam(n)

 
Thread Tools
 
Search this Thread
 
Old Feb 28, 2008 | 02:00 PM
  #1  
GTisRule's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Jun 2006
Posts: 717
Likes: 2
From: Vantucky, WA
Front air dam(n)

Are FQ-400 parts available in Japan? I'm looking for a price and availability for the front air dam from a Evo IX FQ-400.

Thanks!
Old Feb 28, 2008 | 03:26 PM
  #2  
cpoku's Avatar
Evolving Member
iTrader: (2)
 
Joined: Jun 2006
Posts: 156
Likes: 0
From: Washington DC
The fq-400? or The fq-360?

You want the front air dam from the fq-400? or the fq-360?
The reason why im asking is, the 400 is an evo 8 with a carbon lip and the 360 is an evo 9 is a ralliart carbon fiber lip (all stock bumpers with just a different lip)

the parts on the 400 are yes over seas parts but you can find stuff here that are just as good or better.

And remember that car is way different from our cars,
example gas:higher octane = different tune type
S-AYC: usdm does not have it but only on the evo X
egr: euro & japan does not have them
brake horse power is not wheel horse power, etc.

You can make a fq if you want or you can make a better car that fits you.
Old Feb 29, 2008 | 03:26 PM
  #3  
GTisRule's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Jun 2006
Posts: 717
Likes: 2
From: Vantucky, WA
Originally Posted by cpoku
You want the front air dam from the fq-400? or the fq-360?
The reason why im asking is, the 400 is an evo 8 with a carbon lip and the 360 is an evo 9 is a ralliart carbon fiber lip (all stock bumpers with just a different lip)

the parts on the 400 are yes over seas parts but you can find stuff here that are just as good or better.

And remember that car is way different from our cars,
example gas:higher octane = different tune type
S-AYC: usdm does not have it but only on the evo X
egr: euro & japan does not have them
brake horse power is not wheel horse power, etc.

You can make a fq if you want or you can make a better car that fits you.
Looking for FQ-400. I love the look of those cars, I already have a set of the racing dynamics wheels, but I've run out of ideas of where to find a factory FQ-400 lip. Believe me, under hood I'm not trying to make an FQ-400, and I'm well aware of a lack of a S-AYC (At least until some Evo-x's start showing up in wrecking yards hehe)
Old Feb 29, 2008 | 03:40 PM
  #4  
Skywarp's Avatar
Evolving Member
iTrader: (1)
 
Joined: Aug 2006
Posts: 200
Likes: 0
From: SoCal
Originally Posted by GTisRule
Looking for FQ-400. I love the look of those cars, I already have a set of the racing dynamics wheels, but I've run out of ideas of where to find a factory FQ-400 lip. Believe me, under hood I'm not trying to make an FQ-400, and I'm well aware of a lack of a S-AYC (At least until some Evo-x's start showing up in wrecking yards hehe)
There is no FQ-400 IX. Like cpoku posted, you would have to get an VIII front bumper for that lip since your sig says you have an IX. The FQ-400 VIII became the FQ-360 IX and it uses a ralliart lip with Speedline Turini wheels (although i have seen some promo shots with five spokes too though).

Last edited by Skywarp; Feb 29, 2008 at 03:43 PM.
Old Feb 29, 2008 | 06:55 PM
  #5  
GTisRule's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Jun 2006
Posts: 717
Likes: 2
From: Vantucky, WA
Originally Posted by Skywarp
There is no FQ-400 IX. Like cpoku posted, you would have to get an VIII front bumper for that lip since your sig says you have an IX. The FQ-400 VIII became the FQ-360 IX and it uses a ralliart lip with Speedline Turini wheels (although i have seen some promo shots with five spokes too though).
Ahh I got it, I thought the front lip fit either the IX or the VIII, I got some bad information elsewhere then. Thanks! I'm still sticking with the wheels because it's what I like, not modeling after a specific car either way.
 




All times are GMT -7. The time now is 09:17 PM.