2010 Lancer ES Tuning Help
Thread Starter
Newbie
Joined: Jun 2017
Posts: 17
Likes: 5
From: Ontario
2010 Lancer ES Tuning Help
Hello. I'm looking to tune my Lancer. Nothing crazy, I just want to adjust the ignition table to spit some flames out the back on decel. I don't know what software I need or hardware. I already know how to change the table to get flames, I'm really just stuck on the software and hardware side. Any help is greatly appreciated. Thanks in advance.
- Moss
- Moss
Newbie
Joined: Jun 2013
Posts: 3
Likes: 1
From: YST
Hi Moss,
Normally 2008+ lancer can use the "ECUFlash" software and "Tactrix OpenPort 2.0 usb cable" to interface with vehicle to reflash the ecu, you can find on the online store eg. ebay to get it or directly to
http://www.evoscan.com/evoscan-gps-o...t-20-usb-cable
PS. Can you share how to change the table to get flames.
Normally 2008+ lancer can use the "ECUFlash" software and "Tactrix OpenPort 2.0 usb cable" to interface with vehicle to reflash the ecu, you can find on the online store eg. ebay to get it or directly to
http://www.evoscan.com/evoscan-gps-o...t-20-usb-cable
PS. Can you share how to change the table to get flames.
Thread Starter
Newbie
Joined: Jun 2017
Posts: 17
Likes: 5
From: Ontario
Hi Moss,
Normally 2008+ lancer can use the "ECUFlash" software and "Tactrix OpenPort 2.0 usb cable" to interface with vehicle to reflash the ecu, you can find on the online store eg. ebay to get it or directly to
http://www.evoscan.com/evoscan-gps-o...t-20-usb-cable
PS. Can you share how to change the table to get flames.
Normally 2008+ lancer can use the "ECUFlash" software and "Tactrix OpenPort 2.0 usb cable" to interface with vehicle to reflash the ecu, you can find on the online store eg. ebay to get it or directly to
http://www.evoscan.com/evoscan-gps-o...t-20-usb-cable
PS. Can you share how to change the table to get flames.
