RPW Race Headers CHEAP!!!!
Evolved Member
Joined: Apr 2002
Posts: 697
Likes: 1
From: Perth, Western Australia
RPW Headers
The headers have been made with flex pipe etc. They are on there way to us in a large pallet from our manafacturer and from there we are going to de dag them, face them and then package them into one very large pallet - 25 sets and send them to the USA to Vision Imports.
They are virtually identical to the Mirage 1.8 headers except for the fact they are longer to accomodoate the 4G94 taller engine block and vehicle chassies etc.
Ask any of the mirage / eclipse / galant etc people who run our race design extractor series on the gains. They are worthwhile.
We did have a dyno test on an Australian car and picked up a good 10 hp at the front wheels, with much more torque and acceelration from midrange, but that was on an australian car so I cannot comment on what the USA model cars would do.
The main benefit of a group buy is the large reduction in freight charges when sending 25 sets across. If you aer not in teh group buy then you won't get the benefit of the reduction in freight charges.
david Thomas
www.rpw.com.au
They are virtually identical to the Mirage 1.8 headers except for the fact they are longer to accomodoate the 4G94 taller engine block and vehicle chassies etc.
Ask any of the mirage / eclipse / galant etc people who run our race design extractor series on the gains. They are worthwhile.
We did have a dyno test on an Australian car and picked up a good 10 hp at the front wheels, with much more torque and acceelration from midrange, but that was on an australian car so I cannot comment on what the USA model cars would do.
The main benefit of a group buy is the large reduction in freight charges when sending 25 sets across. If you aer not in teh group buy then you won't get the benefit of the reduction in freight charges.
david Thomas
www.rpw.com.au
Evolved Member
Joined: Apr 2002
Posts: 697
Likes: 1
From: Perth, Western Australia
RPW Headers
The headers remember were made on a Mitsubishi Lancer new CG model in Australia which to our knowlegde is identical (Except for driver positions) to the USA lancer.
I will take some photo's and post them on the net when they arrive on our door.
No it will not create a CE light problem.
Freight charges will be minimal because we aer shipping over a crate full of extractors which comes in very cheap.
We also carry camshafts, vernier cam gears, turbo kits, fuel pressure regulators, oversize throttle bodies, rally spec quickshifters etc.
David Thomas
www.rpw.com.au
I will take some photo's and post them on the net when they arrive on our door.
No it will not create a CE light problem.
Freight charges will be minimal because we aer shipping over a crate full of extractors which comes in very cheap.
We also carry camshafts, vernier cam gears, turbo kits, fuel pressure regulators, oversize throttle bodies, rally spec quickshifters etc.
David Thomas
www.rpw.com.au
How long do we have?
what is the cut off date for the Group Buy?
Trying to get reorganized here and since you said they would be shipped in a month or so how long do we have?
WADAD
Trying to get reorganized here and since you said they would be shipped in a month or so how long do we have?
WADAD
Thread Starter
Newbie
Joined: Apr 2002
Posts: 15
Likes: 0
From: Orlando
We also have the full Tein suspension available now, but we are starting a group buy for the Tein springs that will be released OCT 20th. We will be offering them extremly cheap. Our account should be setup, And we will post prices on monday.
Thanks
Matt
Thanks
Matt