Your goals for your Lancer..
Your goals for your Lancer..
I figured I'd start a useful topic here, so here it goes:
This thread is devoted to the goals you plan on reaching with your Lancer. They can be styling and/or performance-oriented. I'll start:
What's done now: Bone Stock
Future Goals:
Performance (not in any particular order) -- TSI Turbo Kit @ 9PSi (with FMIC ->), Evo VIII FMIC, Walbro Fuel Pump, Vortec FMU, Greddy Type-S BOV, Cross Slotted/Drilled Rotors, Forged Pistons, Pauter Rods, Turbo'd Piggyback (when available), Greddy Exhaust, RR Front LSD, Stage II Clutch
Styling: Carbontrix CF Hood + Grille, 20% Window Tint all around, 17" wheels of some sort, Evo VIII wing
What are your plans?
This thread is devoted to the goals you plan on reaching with your Lancer. They can be styling and/or performance-oriented. I'll start:
What's done now: Bone Stock
Future Goals:
Performance (not in any particular order) -- TSI Turbo Kit @ 9PSi (with FMIC ->), Evo VIII FMIC, Walbro Fuel Pump, Vortec FMU, Greddy Type-S BOV, Cross Slotted/Drilled Rotors, Forged Pistons, Pauter Rods, Turbo'd Piggyback (when available), Greddy Exhaust, RR Front LSD, Stage II Clutch
Styling: Carbontrix CF Hood + Grille, 20% Window Tint all around, 17" wheels of some sort, Evo VIII wing
What are your plans?
Current Setup:
Engine Mods
AEM Cold Air Intake Version II (whats left of the stock air intake included)
Road Race///Motorsports Big Bore Fuel Rail (custom painted yellow to match car)(stock fuel rail included)
Ground Fusion Grounding Kit (yellow in color)
Magnecor spark plug wires (stock spark plug wires included)
NGK OEM style laser spark plugs
Road Race///Motorsports Piggyback ECU
Exhaust Mods
Greddy Evolution II Cat-back Exhaust (stock cat-back exhaust included)
Road Race///Motorsports cat delete pipe (not installed, off road use only)
Suspension Mods
Sprint Sport lowering Springs (lowered 1.8” in front and rear)(stock springs included)
Road Race///Motorsports front K strut bar
Road Race///Motorsports rear strut bar
Road Race Designs rear strut bar
Road Race Designs lower tie bar
Road Race Designs RS style trunk bar
Axxis ultimate high performance brake pads
Road Race///Motorsports street series slotted rotors
Road Race///Motorsports stainless steel brake lines (not installed)
Exterior Mods
Accolade Aero Design Evolution VII Extreme front bumper
Accolade Aero Design Evolution VII Extreme rear bumper
Accolade Aero Design Evolution VII Extreme hood
Accolade Aero Design Evolution VII Extreme sideskirts
Accolade Aero Design Evolution VII Extreme rear spoiler
Body kit needs painted and installed
Shaved Trunk lid (except Mitsubishi Diamond)
JDM (Japanese Domestic Market) Cedia Lancer Headlamps Custom Painted Black (Hangers are broken and light doesn't fit perfect in space provided) w/12,000kelvin HID’s (One HID Ballast may be burning out [its not working right])(stock headlamps included, custom painted black)
Road Race///Motorsports Chrome Taillights (need new plugs, original got wet and corroded)
Interior Mods
Ignited Performance Push Button Starter (not installed)
Carbon Fiber glovebox plate
B&M Short Shifter (50% throw reduction)
APC shift knob
Custom 2 gauge panel
Autometer A/F Ratio gauge (not installed)
Autometer Oil Pressure gauge(not installed)
Future Plans:
Sell it for $8000
.
Engine Mods
AEM Cold Air Intake Version II (whats left of the stock air intake included)
Road Race///Motorsports Big Bore Fuel Rail (custom painted yellow to match car)(stock fuel rail included)
Ground Fusion Grounding Kit (yellow in color)
Magnecor spark plug wires (stock spark plug wires included)
NGK OEM style laser spark plugs
Road Race///Motorsports Piggyback ECU
Exhaust Mods
Greddy Evolution II Cat-back Exhaust (stock cat-back exhaust included)
Road Race///Motorsports cat delete pipe (not installed, off road use only)
Suspension Mods
Sprint Sport lowering Springs (lowered 1.8” in front and rear)(stock springs included)
Road Race///Motorsports front K strut bar
Road Race///Motorsports rear strut bar
Road Race Designs rear strut bar
Road Race Designs lower tie bar
Road Race Designs RS style trunk bar
Axxis ultimate high performance brake pads
Road Race///Motorsports street series slotted rotors
Road Race///Motorsports stainless steel brake lines (not installed)
Exterior Mods
Accolade Aero Design Evolution VII Extreme front bumper
Accolade Aero Design Evolution VII Extreme rear bumper
Accolade Aero Design Evolution VII Extreme hood
Accolade Aero Design Evolution VII Extreme sideskirts
Accolade Aero Design Evolution VII Extreme rear spoiler
Body kit needs painted and installed
Shaved Trunk lid (except Mitsubishi Diamond)
JDM (Japanese Domestic Market) Cedia Lancer Headlamps Custom Painted Black (Hangers are broken and light doesn't fit perfect in space provided) w/12,000kelvin HID’s (One HID Ballast may be burning out [its not working right])(stock headlamps included, custom painted black)
Road Race///Motorsports Chrome Taillights (need new plugs, original got wet and corroded)
Interior Mods
Ignited Performance Push Button Starter (not installed)
Carbon Fiber glovebox plate
B&M Short Shifter (50% throw reduction)
APC shift knob
Custom 2 gauge panel
Autometer A/F Ratio gauge (not installed)
Autometer Oil Pressure gauge(not installed)
Future Plans:
Sell it for $8000
.
Last edited by wingnut17; Oct 18, 2005 at 05:09 PM.
What's done now: see signature
Future Goals:
Performance : -- custom turbo kit (almost done)@ 9PSi , LSD, Stage II Clutch, ported 4g93 mani ported, new suspension
Styling: evo 7 body kit, tinted windows
Future Goals:
Performance : -- custom turbo kit (almost done)@ 9PSi , LSD, Stage II Clutch, ported 4g93 mani ported, new suspension
Styling: evo 7 body kit, tinted windows
A good handling, streetable car with good passing power. i would probably be happy with 200 whp. As for looks, most people actually compliment my car, so im guessing im done with that part.
Joined: Feb 2005
Posts: 2,914
Likes: 0
From: Central TX, Houston, and Huntville, TX
yes it really isnt useful but he can still post it. It kind of helps because other people can read it and see stuff they can do and afford that others cant. but hey, theres lots of people out there that want a thread where they can make a list of what they want and see what others want. or you could buy forza motorsports for a visual, or maybe NFSU cause it has a base lancer lol.
Current mods: See my registry/garage.
Short term goals: I want my car drivable again.
Long term goals: P&P the head, swap in non-hydraulic lifters from my Mirage head, valve springs, cam, ...basically rework the entire head, 4g93IM, redo the turbo piping, install the tons of parts I have lying around, 12-18psi of boost or whatever the parts seem to allow. Suspension wise JIC or Tein coilovers with camber plates, rear sway and bounts, and I'll call it a day. Any ICE/show stuff depends upon how I'm feeling at any given moment. Perhaps a car computer w/ touch screen, perhaps just amp and subs. We shall see.
Short term goals: I want my car drivable again.
Long term goals: P&P the head, swap in non-hydraulic lifters from my Mirage head, valve springs, cam, ...basically rework the entire head, 4g93IM, redo the turbo piping, install the tons of parts I have lying around, 12-18psi of boost or whatever the parts seem to allow. Suspension wise JIC or Tein coilovers with camber plates, rear sway and bounts, and I'll call it a day. Any ICE/show stuff depends upon how I'm feeling at any given moment. Perhaps a car computer w/ touch screen, perhaps just amp and subs. We shall see.
Trending Topics
done now:
custom made SRI
custom cat-back w/ greddy evo2 muffler
progress lowering springs
ebay Ralliart grille
depo JDM headlight housings
goals:
pay off loan to less than cars value, SELL
custom made SRI
custom cat-back w/ greddy evo2 muffler
progress lowering springs
ebay Ralliart grille
depo JDM headlight housings
goals:
pay off loan to less than cars value, SELL
Current setup:
RRM SRI
RRM Bored TB
RRM Bored IM
RRM Header
RRM Front strut bar
Progress Sway bar and autocross perches
Ralliart grill
Ralliart Seats
Kartboy underhood bushings
Energy suspension in car bushings
Lancershop Short shifter with a greddy long style shift knob
Evo 8 steering wheel
A bored out block and head that are currently in pieces
High compression 10:1 pistons from Wiseco
Future plans:
Have my car in one piece running fine and dandy
Work on the suspension
Get some decent rubber around some lightweight rims
Not sure about looks, play that by ear
I'd be happy with around 150 hp, good handling and a nice, and comfortable ride (for the most part).
RRM SRI
RRM Bored TB
RRM Bored IM
RRM Header
RRM Front strut bar
Progress Sway bar and autocross perches
Ralliart grill
Ralliart Seats
Kartboy underhood bushings
Energy suspension in car bushings
Lancershop Short shifter with a greddy long style shift knob
Evo 8 steering wheel
A bored out block and head that are currently in pieces
High compression 10:1 pistons from Wiseco
Future plans:
Have my car in one piece running fine and dandy
Work on the suspension
Get some decent rubber around some lightweight rims
Not sure about looks, play that by ear
I'd be happy with around 150 hp, good handling and a nice, and comfortable ride (for the most part).
current ****: alot of crap
soon: kaminari colormatched, paint cf hood, paint cf spoiler (waste) paint es mirrors, lower the back end a little more.... (coilovers in but i want it a lil lower) ....
suspension, well im almost done, just need two more bars.
engine, headers... pig... well all of it, i only got a magnum bore and intake/exhaust
soon: kaminari colormatched, paint cf hood, paint cf spoiler (waste) paint es mirrors, lower the back end a little more.... (coilovers in but i want it a lil lower) ....
suspension, well im almost done, just need two more bars.
engine, headers... pig... well all of it, i only got a magnum bore and intake/exhaust
Originally Posted by azhunballa
turbo route or get the 06 rsx type s
Joined: Feb 2005
Posts: 2,914
Likes: 0
From: Central TX, Houston, and Huntville, TX
Currently:
-magnaflow axelback
-K&N SRI
-RRM Piggyback
-17" hyperblack 5zigen wheels
-Blue underbody neons
-blue brake calipers
Wish list:
-RRM 04-05 Turbo kit
-complete catback
-internals
-bored IM, TB
-accolade Hyper kit w/version 1 front lip w/fenders and eyelids
-RRM CF evo 7 style hood
-accolade CF evo 8 wing
-stock evo 8 seats, front and back
-subs and upgraded speakers
Anyone want to help me out...I'll take donations.
-magnaflow axelback
-K&N SRI
-RRM Piggyback
-17" hyperblack 5zigen wheels
-Blue underbody neons
-blue brake calipers
Wish list:
-RRM 04-05 Turbo kit
-complete catback
-internals
-bored IM, TB
-accolade Hyper kit w/version 1 front lip w/fenders and eyelids
-RRM CF evo 7 style hood
-accolade CF evo 8 wing
-stock evo 8 seats, front and back
-subs and upgraded speakers
Anyone want to help me out...I'll take donations.






