Holiday Gifts for your Lancer
o ok. man that is going to get pretty pricey with the EMS and UEGO gauge. I have the Apexi SAFC 2 and PLX M-250, and in total, cost around 700-800. tuning is taking a while, my afr's are pretty spikey, so im tuning over several days (just breaking up rpm ranges). good luck with yours.
Meh exams on saturday aren't a big deal, I've had an exam on saturday every semester for at least one course in a schedule, so I'm used to it. Something about sciences and having exams at horrible times, already wrote one today at 8 am which meant up at 5.
New Clutch
Well I was not planning on it, but my clutch is starting to slip a bit when I shift into third on a hard shift. I have 43K miles and do not know who can recommend a good one.
If I go to the Mitsubishi dealer, they want me to spend about a grand and use a stock clutch or void my car.
Or, I can try and get some shop (who?) in the Fairfield, CT area to install it. How much would that be?
I would like to get a clutch that is no harder to push down because I do allot of back road driving. Work is almost 30 miles one way and it is my daily driver.
What to do?
-E
If I go to the Mitsubishi dealer, they want me to spend about a grand and use a stock clutch or void my car.
Or, I can try and get some shop (who?) in the Fairfield, CT area to install it. How much would that be?
I would like to get a clutch that is no harder to push down because I do allot of back road driving. Work is almost 30 miles one way and it is my daily driver.
What to do?
-E
Thread Starter
Evolved Member
iTrader: (16)
Joined: May 2004
Posts: 1,425
Likes: 2
From: Toms River, NJ
OZ4g94 -> pricey, yes....likely to yeild nice results, yes. hehe i'm just looking to make the most of my ride and keep it reliable in terms of tech support and such. next in line is some fuel mods (big bore rail, fpr, and fuel pump). that will aid in tuning with EMS so i don't tax the stock parts to much (or deprive any certain injector of fuel). it is going to be a lot of fun stuff hahaha
Well.. I was going to wait until spring to install my turbo kit, but its too cold so I'm just going to have it installed at a shop, so that will be my christmas present to my car.. 
oh, and I'm buying the AutoPower 4point Bolt-in Rollcage..
And maybe a turbo-timer and boost gauge.. w00t.

oh, and I'm buying the AutoPower 4point Bolt-in Rollcage..

And maybe a turbo-timer and boost gauge.. w00t.
Thread Starter
Evolved Member
iTrader: (16)
Joined: May 2004
Posts: 1,425
Likes: 2
From: Toms River, NJ
Originally Posted by ambystom01
Wrong forum, you drive an evo, this is for the base lancer.
Clutch Reccomendations
Clutch Slips
those should get you in the right direction.
definitely get the boost gauge.. I dont know how you waited this long to get that turbo installed..
I just received word that my rpw 63mm TB is ready to be shipped so that is my present.
I just received word that my rpw 63mm TB is ready to be shipped so that is my present.
Evolved Member
iTrader: (7)
Joined: Aug 2003
Posts: 1,846
Likes: 0
From: Miami Lakes, Florida --Da 305 baby!
Originally Posted by comatose721
i know it's a trip but if you'd like to make a road trip to NJ i'll take a day off and spend it putting mods in with you in my garage. i'm getting a new space heater soon as well.
i got a turbo.. just sitting in my room waiting for April - May


