Base lancer to Evo parts Compatability thread
#258
Great read! Thanks to all who have provided information. I'll be using a lot of this and putting parts into my 2004 lancer ralliart! If any one is alberta and can help me out finding seats that would be appreciated! Or a lead on where I could find some!
#260
#261
EvoM Community Team Leader
its a different engine/cylinder head so chances are it won't without modification. I have no idea what the ports look like on the 4g69 head or how they are spaced so i couldn't even speculate it its even possible with modification or not.
#262
I picked up a CS9W 2.0 Sport Wagon (4G63 N/A) recently over here in the UK - I found an old thread referencing Mirage / Lancer Evo 1-3 lower arms fitting, recent MOT (roadworthiness test) shows "Excessive play" in factory CS5W rear arm bushing - wondered if there was a definitive "Yes" that mirage/evo 3 arms fit as I can pick these up easily and cheaply...
#264
Will a evo down pipe work on a 10 gts 5speed
Jah[QUOTE=JRR;7529863]i know there is a compatability thread for lancers and mirages, but nothing for the evo. there are SOME parts that fit, but most do not. here is a list of what i could come up with that works/dont work with a little explanation.
THIS IS A REFERENCE ONLY, I DONT TAKE ANY RESPONSIBILITY IF SOMETHING IS DONE WRONG OR NOT INSTALLED PROPERLY!
WORKS:
turbo - will fit with custom 4g94 mani (a few mani's floatin around the threads here and speed corps used to make them)
stock intercooler and intercooler piping - for the intercooler,remove the front rollers and use the 2 outside bolt holes. for the piping, holes are there and threaded already if i rember correctly.
aftermarket intercooler and piping - depends on size but will probably reqire cutting stock bumper to make fit for the intercooler. for the pipes may require like the AMS small battery kit (ie. the greddy pipe setup or AMS). the set of injen pies will work as well with the stock evo battery tray. here are some pics and some info on what to do to make them fit like a charm!
https://www.evolutionm.net/forums/7549710-post230.html
battery tray - right by where the stock air cleaner would sit by the transmission mount on the drivers side. the holes are there and tapped already
radiator - heard that it fits but dont know the up/downsde to actually running it.
trunk - uses all the same bolts and lock assemblies. nice if you find an evo wing and dont want to fill the holes in your trunk form a stock lancer trunk with factory spoiler.
radio relocation kit - most of you know this already as for we have gauges where the stock radio sits, or are running a dual radio setup.
gauge pods - a pillar, steering column, radio relocation (see above). basically if you can mount a gauge in an evo you can mount one in a base model.
turbo timer w/ harness - splices right into your ignition system with a harness from hks or others.
spedometer cluster - direct drop in from where ours sits now.
399 mass air flow sensor - works if you know the values tobe put into ecuflash and you have the cable to reflash the ecu
front shock and struts - direct bolt on from what i hear. not sure of the benefits but have heard they do work. from 03lancerES: the only way for the ES (except for the 06 style es's that use the same suspension as the oz's and ralliarts)models to utilize this is by using the front strut mount from an OZ which is bolt on then you can bolt on the evo's
evo 8 ecu - requres a reflash cable, ecu flash and a lot of patience. once in and working opens up tuning capabilities for turbo setups.
stock and most aftermarket down pipes - works with evo turbo and o2 housing setup.
stock interior - seats, door panels, center console, evo 8 steering wheel, dash, trim, vents(if i missed something please let me know)
steering rack - tighter ratio
evo mr aluminum roofs / AMS Carbon Roof -
evo rims - can be used on lancers with a 5 lug hub or have done a 5 lug conversion
rear calipers/rotors - work on disc brake models
body trim - posted by turbotime - can mount or be mounted to the lancer chassis
glass - posted by turbotime - includes mirrors and all glass are swappable
front strut bars -
hood latch - uses all 3 of the same bolt holes as the base lancer. works great if you have done an evo 7 conversion to the front and want to put some nice mesh in hte grille.
evo fuel pressure regulator - will have to bore out stock or aftermarket fuel rail a bit to make it fit.
Evo MR Vortex Generator - if the roof will fit this will as well. can get authentic mitsu or aftermarket.
DOES NOT WORK
4g63 - will not fit WITHOUT a lot of work and a lot of money. if your going to put that in, you might as wellhave bought the evoin the first place. this is a VERY touchy topic here on the forums
manifolds - differnt distance on runners. close but no cigar. requires a welder,and some creative injenuity to get the ports tomatch
driveline - differnet slpines and longer i believe
rear shocks and struts - dont fit, differnet configuration
front brembo calipers - posted by turbotime - wont fit to lancer hub
sway bar - posted by turbotime - end links are different
window and lock regulators - posted by link62
rear strut bars -
THIS IS A REFERENCE ONLY, I DONT TAKE ANY RESPONSIBILITY IF SOMETHING IS DONE WRONG OR NOT INSTALLED PROPERLY!
WORKS:
turbo - will fit with custom 4g94 mani (a few mani's floatin around the threads here and speed corps used to make them)
stock intercooler and intercooler piping - for the intercooler,remove the front rollers and use the 2 outside bolt holes. for the piping, holes are there and threaded already if i rember correctly.
aftermarket intercooler and piping - depends on size but will probably reqire cutting stock bumper to make fit for the intercooler. for the pipes may require like the AMS small battery kit (ie. the greddy pipe setup or AMS). the set of injen pies will work as well with the stock evo battery tray. here are some pics and some info on what to do to make them fit like a charm!
https://www.evolutionm.net/forums/7549710-post230.html
battery tray - right by where the stock air cleaner would sit by the transmission mount on the drivers side. the holes are there and tapped already
radiator - heard that it fits but dont know the up/downsde to actually running it.
trunk - uses all the same bolts and lock assemblies. nice if you find an evo wing and dont want to fill the holes in your trunk form a stock lancer trunk with factory spoiler.
radio relocation kit - most of you know this already as for we have gauges where the stock radio sits, or are running a dual radio setup.
gauge pods - a pillar, steering column, radio relocation (see above). basically if you can mount a gauge in an evo you can mount one in a base model.
turbo timer w/ harness - splices right into your ignition system with a harness from hks or others.
spedometer cluster - direct drop in from where ours sits now.
399 mass air flow sensor - works if you know the values tobe put into ecuflash and you have the cable to reflash the ecu
front shock and struts - direct bolt on from what i hear. not sure of the benefits but have heard they do work. from 03lancerES: the only way for the ES (except for the 06 style es's that use the same suspension as the oz's and ralliarts)models to utilize this is by using the front strut mount from an OZ which is bolt on then you can bolt on the evo's
evo 8 ecu - requres a reflash cable, ecu flash and a lot of patience. once in and working opens up tuning capabilities for turbo setups.
stock and most aftermarket down pipes - works with evo turbo and o2 housing setup.
stock interior - seats, door panels, center console, evo 8 steering wheel, dash, trim, vents(if i missed something please let me know)
steering rack - tighter ratio
evo mr aluminum roofs / AMS Carbon Roof -
evo rims - can be used on lancers with a 5 lug hub or have done a 5 lug conversion
rear calipers/rotors - work on disc brake models
body trim - posted by turbotime - can mount or be mounted to the lancer chassis
glass - posted by turbotime - includes mirrors and all glass are swappable
front strut bars -
hood latch - uses all 3 of the same bolt holes as the base lancer. works great if you have done an evo 7 conversion to the front and want to put some nice mesh in hte grille.
evo fuel pressure regulator - will have to bore out stock or aftermarket fuel rail a bit to make it fit.
Evo MR Vortex Generator - if the roof will fit this will as well. can get authentic mitsu or aftermarket.
DOES NOT WORK
4g63 - will not fit WITHOUT a lot of work and a lot of money. if your going to put that in, you might as wellhave bought the evoin the first place. this is a VERY touchy topic here on the forums
manifolds - differnt distance on runners. close but no cigar. requires a welder,and some creative injenuity to get the ports tomatch
driveline - differnet slpines and longer i believe
rear shocks and struts - dont fit, differnet configuration
front brembo calipers - posted by turbotime - wont fit to lancer hub
sway bar - posted by turbotime - end links are different
window and lock regulators - posted by link62
rear strut bars -
Last edited by flummgts; Apr 29, 2019 at 11:03 PM. Reason: Misspelled
#265
This is a great thread! There are so many parts that 'seem' to be compatible, but it's always a little unclear on websites and from manufacturers.
With that said does anyone know if the e-brake handle will swap between the EVO"s and the N/A models?
I know most interior parts are the same, but my ES brake handle is one piece of plastic all the way under the console and the EVO ones look to be two-piece. I know the rear brakes are quite different so I'm just not sure if the cable lengths/tensions/angles would be the same or different.
Thanks for any assistance.
With that said does anyone know if the e-brake handle will swap between the EVO"s and the N/A models?
I know most interior parts are the same, but my ES brake handle is one piece of plastic all the way under the console and the EVO ones look to be two-piece. I know the rear brakes are quite different so I'm just not sure if the cable lengths/tensions/angles would be the same or different.
Thanks for any assistance.
Thread
Thread Starter
Forum
Replies
Last Post
WikdEvo
For Sale/WTB - Engine / Drivetrain / Power
11
May 21, 2014 01:00 PM