I need help installing a push start button on my car. I went to Autozone and got the kit and read the instructions... i got the basic idea. But what i need to know is where the ignition harness is and how to access it. Also I tried looking @ the wiring diagram for the Lancer as seen here:

https://www.evolutionm.net/models/la...irediag.php?s=

but i cant seem to decipher what wire color is serves what function. Like what is the 12v source and what is the ground and what is the ignition wire... etc.

Please

 

These pix might help jog some peep's memories...






Is this where the ignition and starter wires run?


or maybe here...


or maybe even here


My face is red cuz all the friggin blood ran down to it while i was taking pix...

 

haha yeah i was gonna buy that from autozone as well..but i have NO frickin clue how to wire it up....Kontra has a push-start button though, have him post a how-to cuz i want one as well!

 

if you have the push start can u still use the reg ignition or no?

 

you need to wire it into your ingnition harness it isnide the steering columb if you take off the top and bottom plastic covers you will see it on the left side (looking from the top)

 

thats a really cool idea, i want one now too. How much do they cost?

 

i've been thinkin about doing this...

 

are there better pics of the instructions? i can't read the words by the relay.

 

kar33m, i really havent found out the answer to this, but it's been on my mind for a while. u need the key in the Start slot to get the push button to work right?

 

check the roadrace section on this site kareem... how-to install a turbo timer was just put in there... it doesnt say which wire it is but it tells you the general place where it is at so if you can read the diagram from there...

 

kar33m ... how much did u pay for the push start? im pretty interested in buying one myself.

 

I paid $19 for that kit from autozone... as for a better picture of the instructions, i dont have one but the words by the relay are just the color names of the wires. Im gonna go check out the road race section for the turbo timer how-to.

 

well here's kind of a way to test the wires. pull out the key cylinder. connect a wire from the middle terminal. if you connect that wire to a terminal and the car tries to start, that's the starter terminal. if accessories go on, well that's the accessories terminal. and the middle terminal in the beginning is the hotwire. and that's how you hotwire a car, or put in a push button starter.

 

somebody needs to do a how-to on this...

 

That would be very helpful.