REAR Bumper Removal
Thread Starter
Newbie
Joined: Sep 2013
Posts: 2
Likes: 0
From: WV
REAR Bumper Removal
I have a 2012 Lancer GT and im wanting to remove my rear bumper to install Smoked LED reflectors is there any video, steps or visual Guide to help me out doing this I cant find anything online
PLEASE HELP
PLEASE HELP
When you pop the trunk open there is a bolt on each side under the tail light assembly.
IIRC, the rest are just plastic clips and maybe a couple of screws holding it to the rear fender liner.
Then two plastic clips that you get from underneath that hold it to the vehicle.
Once you get all that stuff out of the way.. just pull the sides off the fender.
Also take care when removing the bumper cover because of the electrical harnesses.
IIRC, the rest are just plastic clips and maybe a couple of screws holding it to the rear fender liner.
Then two plastic clips that you get from underneath that hold it to the vehicle.
Once you get all that stuff out of the way.. just pull the sides off the fender.
Also take care when removing the bumper cover because of the electrical harnesses.
Thread
Thread Starter
Forum
Replies
Last Post
DontStopMe
Evo How Tos / Installations
7
Oct 7, 2019 06:58 PM
mazda8799
04-06 Lancer Ralliart How To Requests / Questions / Tips
7
Sep 29, 2009 05:17 PM