2014 Lancer DE A/C Install
#1
Newbie
Thread Starter
Join Date: Jul 2015
Location: Winnipeg
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
2014 Lancer DE A/C Install
Hi Guys,
I recently decided to install A/C in my lancer that didn't come stock with it. The majority of the system comes already installed (compressor, evaporator, electronics, etc.). I picked up a used condenser and lines and installed them. I then had a mechanic pressure test, vaccuum and charge my system without issue. When i hit the A/C button inside the car, it beeps but the light doesn't turn on, nor does the compressor. I have read that this likely needs to be programmed. What would I require as far as a cable and software to be able to program this? I am fairly familiar with coding, but not at all with vehicle programming. Any help would be greatly appreciated.
Thanks,
Jeff
I recently decided to install A/C in my lancer that didn't come stock with it. The majority of the system comes already installed (compressor, evaporator, electronics, etc.). I picked up a used condenser and lines and installed them. I then had a mechanic pressure test, vaccuum and charge my system without issue. When i hit the A/C button inside the car, it beeps but the light doesn't turn on, nor does the compressor. I have read that this likely needs to be programmed. What would I require as far as a cable and software to be able to program this? I am fairly familiar with coding, but not at all with vehicle programming. Any help would be greatly appreciated.
Thanks,
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
keonigt
Evo X Engine / Turbo / Drivetrain
1
Dec 26, 2014 05:48 PM
edwinisdumb15
West Region
1
Jul 16, 2014 10:14 AM
BoostedMKIV
North Texas Evo Club (NTEC)
4
Jan 22, 2014 07:41 AM