Reverse Indiglo on my '03 ES Installed!!
Thread Starter
Evolved Member
iTrader: (7)
Joined: Aug 2003
Posts: 1,846
Likes: 0
From: Miami Lakes, Florida --Da 305 baby!
Originally posted by cautiontext
i was wondering Kid7 how did you have to attach the red and black wire to the parking switch? Do I need a wire crimp or what? Also did yours come with the dimmer harness?
i was wondering Kid7 how did you have to attach the red and black wire to the parking switch? Do I need a wire crimp or what? Also did yours come with the dimmer harness?
I connected mine to my dimmer switch. Black guage wire to black
dimmer wire.. Red guage wire to Green and white dimmer wire. So start Splicing! or Crimping !!
Disconnect your battery 1st or your gonna blow a fuse like i did.. (replacing today!)yeah mine came with a dimmer harness. I stored it in that thing that looks like an ash tray on the driver side...under the steering wheeel..lol
when it dims it has like a miami dolphins color scheme. does it do that on yours also??
Thread Starter
Evolved Member
iTrader: (7)
Joined: Aug 2003
Posts: 1,846
Likes: 0
From: Miami Lakes, Florida --Da 305 baby!
yeah i'll repost pics within a day..
WhiteMike: I turned all my needles to the RIGHT. And slid the guages over them 1 by 1. from Right to left.
WhiteMike: I turned all my needles to the RIGHT. And slid the guages over them 1 by 1. from Right to left.
Evolving Member
Joined: Sep 2003
Posts: 123
Likes: 0
From: New York
Hey Kid7, I took my dash appart and have a few questions.
How do I get the old face off, There are black covers on the needles and the instructions said not to remove them. So how do I get it off? Also the two strands of wires that are connected to a rectangular connector in the back of the original guage, does it pop off? I didnt want to pull and break the thing and i didnt see any place for the black clips to connect to when I took the old guages out. I need some help, I dont know what to do.
How do I get the old face off, There are black covers on the needles and the instructions said not to remove them. So how do I get it off? Also the two strands of wires that are connected to a rectangular connector in the back of the original guage, does it pop off? I didnt want to pull and break the thing and i didnt see any place for the black clips to connect to when I took the old guages out. I need some help, I dont know what to do.
i was going to buy these gauges but i decided to just go to mitsubishi and buy the bulbs from the OZ gauges and install them. I think it looks sick, and it only cost me $15.00 and I got to keep my black face gauges. I changed all of the lights in my interior to red..... I mean those gauges do look really nice, but I chose a cheaper alternative and I didn't really like the fact that they were white faces.....I didn't think it would look too good on my grey interior with the dark wood dash.....just my .02, but anything is better than the stock whitesh yellow lights 
Evolving Member
Joined: Sep 2003
Posts: 123
Likes: 0
From: New York
Ok, Finally installed them today without a problem. To tell you guys the truth, these guages look sick! The only problem is my digital camera suxs so I will only be able to post a day pic. Sorry
[img]www.lll[/img]
[img]www.lll[/img]
Thread Starter
Evolved Member
iTrader: (7)
Joined: Aug 2003
Posts: 1,846
Likes: 0
From: Miami Lakes, Florida --Da 305 baby!
yeo peoples... lol i got the pix.. but i dont know how to upload them correctly .... Some newbie things come back 2 haunt u 
lol.. someone lemme know how its done
.... Some newbie things come back 2 haunt u lol.. someone lemme know how its done