Carbon Fiber Products!
Originally posted by agsmooth84
make one that half carbine or whatever it takes for it to cost around 400
make one that half carbine or whatever it takes for it to cost around 400
Newbie
Joined: Oct 2002
Posts: 16
Likes: 0
From: Chattanooga, TN
why so much? im not getting the sides in c/f!!! thats just $20 off, that's not a deal!! or better yet, is anyone willing to "split" the wing with me, i just want the center part and someone else can buy the sideposts!!
Newbie
Joined: Oct 2002
Posts: 8
Likes: 0
From: S.A.TX
Originally posted by calvinwch
here is the lancer hood look at side angle with air vent on top right.
the red line is where the vent will start, like the picture last post.
here is the lancer hood look at side angle with air vent on top right.
the red line is where the vent will start, like the picture last post.
1) the air vent looks like infront the engine, will the cold air go through the front vent then be suck out right away ?
2) Is it ok under rainning day?
.
.
.
.
.
.
.
3) Is it heil damage approvel ?
Don't shoot me!
Kai
Originally posted by Kai
calvin, It looks cool, but I got some questions,
1) the air vent looks like infront the engine, will the cold air go through the front vent then be suck out right away ?
2) Is it ok under rainning day?
.
.
.
.
.
.
.
3) Is it heil damage approvel ?
Don't shoot me!
Kai
calvin, It looks cool, but I got some questions,
1) the air vent looks like infront the engine, will the cold air go through the front vent then be suck out right away ?
2) Is it ok under rainning day?
.
.
.
.
.
.
.
3) Is it heil damage approvel ?
Don't shoot me!
Kai
HEIL ???
as hell?
the front end vent can give more hot air flow out from radiator or oil colder what ever stuff will be on the front end.
and the rear vent on right hand will be best for people who have intake around that area, that will give cold air intake from outside of engin. Else it can be air flow out from engin part.
front end water will be down around the radiator, so no worry for the engin parts. rear vent will be around stocking filter box area, no worry about that too.
and
i'm still going to shoot 
Originally posted by HartLancer
why so much? im not getting the sides in c/f!!! thats just $20 off, that's not a deal!! or better yet, is anyone willing to "split" the wing with me, i just want the center part and someone else can buy the sideposts!!
why so much? im not getting the sides in c/f!!! thats just $20 off, that's not a deal!! or better yet, is anyone willing to "split" the wing with me, i just want the center part and someone else can buy the sideposts!!
Originally posted by SWIFT1
i agree . . . the evo wing with just the c/f deck should be like $100 less than the full c/f wing . . . selling the partial c/f wing for $20 less is basically saying that the c/f side posts cost $20 . . . yea, you need to come with a better deal than that . . . just my .02 cents . . .
i agree . . . the evo wing with just the c/f deck should be like $100 less than the full c/f wing . . . selling the partial c/f wing for $20 less is basically saying that the c/f side posts cost $20 . . . yea, you need to come with a better deal than that . . . just my .02 cents . . .
full carbon wing should be sold like lower $5xx, if you like retail price i can sell it to you for retail price. I have no proble with that.
also carbon are come with high gloss polished, you don't need wax or polish it again when you get it.
like I say before, the full carbon win i should sell it high for my own profit. But i didn't, i'm selling full carbon for this price will be promotion ONLY. I won't have much to sell here.
Originally posted by calvinwch
If you think my price is not good, you can go to buy from other seller. This type of carbon fiber are expensive, it is for racing using light weight.
full carbon wing should be sold like lower $5xx, if you like retail price i can sell it to you for retail price. I have no proble with that.
also carbon are come with high gloss polished, you don't need wax or polish it again when you get it.
like I say before, the full carbon wing i should sell it high for my own profit. But i didn't, i'm selling full carbon for this price will be promotion ONLY. I won't have much to sell here.
If you think my price is not good, you can go to buy from other seller. This type of carbon fiber are expensive, it is for racing using light weight.
full carbon wing should be sold like lower $5xx, if you like retail price i can sell it to you for retail price. I have no proble with that.
also carbon are come with high gloss polished, you don't need wax or polish it again when you get it.
like I say before, the full carbon wing i should sell it high for my own profit. But i didn't, i'm selling full carbon for this price will be promotion ONLY. I won't have much to sell here.
Newbie
Joined: Jun 2002
Posts: 13
Likes: 0
From: Palm Harbor, FL
hey on the carbon fiber hood if its a direct bolt on what is the front grill going to look like? is it going to be carbon fiber also? its not going to look like the crappy plastic chrome thing the hood came with is it?
Originally posted by deceptacop
hey on the carbon fiber hood if its a direct bolt on what is the front grill going to look like? is it going to be carbon fiber also? its not going to look like the crappy plastic chrome thing the hood came with is it?
hey on the carbon fiber hood if its a direct bolt on what is the front grill going to look like? is it going to be carbon fiber also? its not going to look like the crappy plastic chrome thing the hood came with is it?
we working on the grill for different styles, but not yet finished.
Yes it is direct bolt on to USA lancer, no MOD need for the hood.
