EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)
-   Lancer Vendor Classifieds (https://www.evolutionm.net/forums/lancer-vendor-classifieds-87/)
-   -   RS style trunk bar (02 & 03 only) (https://www.evolutionm.net/forums/lancer-vendor-classifieds/101489-rs-style-trunk-bar-02-03-only.html)

PDXRalliArt Oct 3, 2004 02:13 PM

RS style trunk bar (02 & 03 only)
 
2 Attachment(s)
I will be offering an RS style trunk bar for sale.

These fit the 02 & 03 Lancers only.

I will be offering them for $65 shipped in the lower 48. (CDN to add $10)

There will be 10 available at this price. Paypal is preferred, but checks and money orders will be accepted.

PM or post any questions you may have.

Thanks,

Rob

https://www.evolutionm.net/forums/at...id=46289&stc=1

https://www.evolutionm.net/forums/at...id=46290&stc=1

pgmike Oct 3, 2004 02:33 PM

what are the benefits of this product?

PDXRalliArt Oct 4, 2004 08:13 AM

Same as the EVO RS. Its a bar like the factory RS bar. It firms up the back end.

livelyjay Oct 4, 2004 08:53 AM

You mean the trunk reinforcement bar right? Do holes need to be drilled in the trunk area for this install?

PDXRalliArt Oct 4, 2004 08:56 AM

No drilling, its a direct bolt on with existing hardware.

Archangelite Oct 4, 2004 08:57 AM

any pics?

livelyjay Oct 4, 2004 08:59 AM

Nice creation, although you are making my suspension upgrade check list longer and longer {thumbup}.

Centrylancer Oct 4, 2004 09:24 AM

pic and how strong is it?

PDXRalliArt Oct 4, 2004 09:36 AM

I'll get some pics tonight. I weigh 180 and I can stand in the middle of it and it will not flex at all. Very strong.

The bar is similar to this one I made for sentinal. Here are some pics, but the bar installs further towards the front of the car (3 inches or so), you will not have to trim any plastic at all, just the carpet.

https://www.evolutionm.net/forums/at...chmentid=41835

https://www.evolutionm.net/forums/at...chmentid=41837

https://www.evolutionm.net/forums/at...chmentid=41836

digdat Oct 4, 2004 09:52 AM

will this cover the donut tire? meaning, if we got a flat, would we haveta remove the bar to get to the replacement tire?

PDXRalliArt Oct 4, 2004 10:01 AM


Originally Posted by digdat
will this cover the donut tire? meaning, if we got a flat, would we haveta remove the bar to get to the replacement tire?

Its over the tire a little, but the tire can slide out from under the bar.

pgmike Oct 4, 2004 12:29 PM

well you know im interested rob

Handmemyarms Oct 4, 2004 12:38 PM

Ive already got the other three bars (tie, strut, and sway) so im wondering if anyone knows how great of a difference that this bar will put into effect (is it worth it)?

livelyjay Oct 4, 2004 12:40 PM

Tying any two points of the chassis together will help with rigidity. Although with all three of the other bars, I'm not sure it will make much a difference. But hell, for $65 you don't have much to lose.

Handmemyarms Oct 4, 2004 12:42 PM

^ true, but uh 65 not 60 :-D (damn im cheap)


All times are GMT -7. The time now is 04:13 PM.


© 2024 MH Sub I, LLC dba Internet Brands