712rwhp supra w/ Stock block & cams !!!
Thread Starter
Evolved Member
iTrader: (5)
Joined: May 2003
Posts: 921
Likes: 1
From: Atlanta, Georgia
712rwhp supra w/ Stock block & cams !!!
Just got off the dyno and wanted to post the graph, car is a 94 Supra.
Mods: 95lb injectors, 4" turbo back, Greddy 4row, hks gt wastegate (1.5bar spring), Boostlogic 71GTQ.81 turbo kit, AEM EMS, HKS DLi, NGK 3330 (.20gap), Dual walboro 255's, SP fuel rail
Runs were made on C12 mixed 50/50 with 93 shell Vpower @ 29psi Tuned @ TopSpeed.
Stock parts: Block, pistons, rods, head, cams, valves, intake, throttle body.
Next week we are installing cams so I will update this post with the new graph. The car should break over 800rwhp with the cams!!
Mods: 95lb injectors, 4" turbo back, Greddy 4row, hks gt wastegate (1.5bar spring), Boostlogic 71GTQ.81 turbo kit, AEM EMS, HKS DLi, NGK 3330 (.20gap), Dual walboro 255's, SP fuel rail
Runs were made on C12 mixed 50/50 with 93 shell Vpower @ 29psi Tuned @ TopSpeed.
Stock parts: Block, pistons, rods, head, cams, valves, intake, throttle body.
Next week we are installing cams so I will update this post with the new graph. The car should break over 800rwhp with the cams!!
Evolved Member
iTrader: (5)
Joined: Dec 2003
Posts: 1,858
Likes: 0
From: Work - New York, Alaska, Mexico or the Caribbean. -Home - Tx Hill Country
Originally Posted by BadazzCR
Just got off the dyno and wanted to post the graph, car is a 94 Supra.
Mods: 95lb injectors, 4" turbo back, Greddy 4row, hks gt wastegate (1.5bar spring), Boostlogic 71GTQ.81 turbo kit, AEM EMS, HKS DLi, NGK 3330 (.20gap), Dual walboro 255's, SP fuel rail
Runs were made on C12 mixed 50/50 with 93 shell Vpower @ 29psi Tuned @ TopSpeed.
Stock parts: Block, pistons, rods, head, cams, valves, intake, throttle body.
Next week we are installing cams so I will update this post with the new graph. The car should break over 800rwhp with the cams!!
Mods: 95lb injectors, 4" turbo back, Greddy 4row, hks gt wastegate (1.5bar spring), Boostlogic 71GTQ.81 turbo kit, AEM EMS, HKS DLi, NGK 3330 (.20gap), Dual walboro 255's, SP fuel rail
Runs were made on C12 mixed 50/50 with 93 shell Vpower @ 29psi Tuned @ TopSpeed.
Stock parts: Block, pistons, rods, head, cams, valves, intake, throttle body.
Next week we are installing cams so I will update this post with the new graph. The car should break over 800rwhp with the cams!!
Thread Starter
Evolved Member
iTrader: (5)
Joined: May 2003
Posts: 921
Likes: 1
From: Atlanta, Georgia
good question.. but I feel with the launch control setup like it is he should have no problem beating me. Off the line we are able to build 10psi of boost, now hooking it up will be a problem. Before on the smaller T67 turbo with out the AEM or launch control he was able to run 12.10 @ 132mph (620rwp) so I feel he should be deep in the 11's now or on some slicks mid 10's
I want a Supra
Trending Topics
Newbie
Joined: Feb 2005
Posts: 3
Likes: 0
Originally Posted by BadazzCR
good question.. but I feel with the launch control setup like it is he should have no problem beating me. Off the line we are able to build 10psi of boost, now hooking it up will be a problem. Before on the smaller T67 turbo with out the AEM or launch control he was able to run 12.10 @ 132mph (620rwp) so I feel he should be deep in the 11's now or on some slicks mid 10's
Originally Posted by BadazzCR
Just got off the dyno and wanted to post the graph, car is a 94 Supra.
Mods: 95lb injectors, 4" turbo back, Greddy 4row, hks gt wastegate (1.5bar spring), Boostlogic 71GTQ.81 turbo kit, AEM EMS, HKS DLi, NGK 3330 (.20gap), Dual walboro 255's, SP fuel rail
Runs were made on C12 mixed 50/50 with 93 shell Vpower @ 29psi Tuned @ TopSpeed.
Stock parts: Block, pistons, rods, head, cams, valves, intake, throttle body.
Next week we are installing cams so I will update this post with the new graph. The car should break over 800rwhp with the cams!!
Mods: 95lb injectors, 4" turbo back, Greddy 4row, hks gt wastegate (1.5bar spring), Boostlogic 71GTQ.81 turbo kit, AEM EMS, HKS DLi, NGK 3330 (.20gap), Dual walboro 255's, SP fuel rail
Runs were made on C12 mixed 50/50 with 93 shell Vpower @ 29psi Tuned @ TopSpeed.
Stock parts: Block, pistons, rods, head, cams, valves, intake, throttle body.
Next week we are installing cams so I will update this post with the new graph. The car should break over 800rwhp with the cams!!
Bring It! HaHa... Very nice numbers on stock block! But the 10psi off the line is no biggie IMO i make that no problem without really messing with the 2step on the AEM.
Chris
Chris
Registered User
Joined: Aug 2004
Posts: 8
Likes: 0
Nice number. I made EXACTLY the same number on my T88H with stock cams, VPC/Emanage and 26psi.
Never got a chance to see what she had with the AEM and Crower 276/284 cams and 36psi
.
Later,
Alex W.
(95 Supra...Stolen 7/22/04)
Never got a chance to see what she had with the AEM and Crower 276/284 cams and 36psi
.Later,
Alex W.
(95 Supra...Stolen 7/22/04)
Newbie
Joined: Feb 2005
Posts: 7
Likes: 0
From: Northern NJ
Hopefully I'll have enough money to throw a single turbo in my mkiv..
OVRBST i read the thread on supraforums..sorry that sh*t hadda happen to u man u didnt deserve it..
i'm probably gonna throw in an SP74 kit..i have a 93 6 speed tt
OVRBST i read the thread on supraforums..sorry that sh*t hadda happen to u man u didnt deserve it..
i'm probably gonna throw in an SP74 kit..i have a 93 6 speed tt
Thread
Thread Starter
Forum
Replies
Last Post
Big Reg
EvoM New Member / FAQs / EvoM Rules
4
Jul 14, 2014 10:44 AM
vegasse
The Loft / EvoM Car Talk Corner
226
Oct 31, 2009 03:27 PM
SupraT71
The Loft / EvoM Car Talk Corner
43
Jan 18, 2009 10:12 PM
EVO-8-Nate
Evo General
72
Nov 10, 2005 04:24 AM
Jasil
The Loft / EvoM Car Talk Corner
4
Oct 11, 2005 07:46 PM
