Notices
The Loft / EvoM Car Talk Corner The landing pad for automotive discussions, news, articles, and opinions. A place for the community to kick back and chat.

650 WHP Street Driven Z, Pump Gas+meth

Thread Tools
 
Search this Thread
 
Old Nov 6, 2008 | 01:35 PM
  #1  
Julian's Avatar
Thread Starter
Evolving Member
 
Joined: Oct 2008
Posts: 116
Likes: 0
From: New Joisey
650 WHP Street Driven Z, Pump Gas+meth

Just wanted to show some pics of a customers car, we did with meth and 93 Octane. Still kept the car a bit on the conservative side with the tune for safety. We just wanted to raise the boost safely.

The car is running a built bottom end, with JWT cams
APS Extreme TT kit
Dual 3" turbo back APS exhaust
HKS Fcon
AEM Meth kit
HKS EVC
HKS Knock Amp

The current set up is done where the AEM meth kit has a failsafe wire that hooks up to the FCON "Scramble Boost" input. If for some reason the AEM faults or throws an error coed it will automatically disable the "Scramble Map" Tune and allow the car to run the 93 octane tune. Basically on a 350Z 17-18 psi is the maximum you can go on 93 octane with a very conservative tune, the meth allows me to add back in some timing and run a bit leaner AFR's to make the 650whp. This car is pretty much useless on street tires.






Reply
Old Nov 6, 2008 | 01:39 PM
  #2  
DSMorBUST's Avatar
Evolved Member
 
Joined: Feb 2006
Posts: 2,145
Likes: 0
From: North NJ ---> ATL
sick....
Reply
Old Nov 6, 2008 | 04:10 PM
  #3  
Julian's Avatar
Thread Starter
Evolving Member
 
Joined: Oct 2008
Posts: 116
Likes: 0
From: New Joisey
Originally Posted by DSMorBUST
sick....
Grassyass sir..
Reply
Old Nov 6, 2008 | 04:16 PM
  #4  
broddey's Avatar
Evolving Member
iTrader: (5)
 
Joined: Nov 2005
Posts: 498
Likes: 0
From: Tampa, FL
Very nish. . . any pics of the engine bay?
Reply
Old Nov 6, 2008 | 07:01 PM
  #5  
itsme4g63's Avatar
Evolved Member
iTrader: (46)
 
Joined: Mar 2005
Posts: 638
Likes: 0
From: Outer Space
aside from the body kit I like veryyy mcuhhh! Aps always has quality parts!
Reply




All times are GMT -7. The time now is 10:59 AM.