WTB - Every rear suspension & subframe bolt + brake shields + rear subframe mount
WantedSteering/Suspension
-
Price
Any Price
- Location Winnipeg, MB, R2N2N2, Canada
- Condition Used
Description:
Just putting out an ad here before buying new from the dealer.
I'm looking to buy a full set of 4 brake backing plates (Brembo-equipped car) in good condition (not bent, rusted or damaged).
I'm putting a later Evo (4-9) suspension in my car and need every single rear suspension bolt and subframe bolt, plus the rear sway bar brackets. I'm going to be re-plating all of the bolts, so it does need to be cheap enough that it makes more sense to do this than buy new.
Full breakdown:
2x LCA to knuckle bolts, washers & nuts
2x LCA to subframe bolts & nuts (eccentric)
2x LCA to shock bolts & nuts
2x Trailing arm to chassis bolts & nuts
2x Trailing arm ball joint nuts
2x Trailing arm ebrake cable bolts
2x Toe arm bolts, washers & nuts (eccentric)
2x Toe arm ball joint nuts
4x Upper arm to chassis bolts
2x Upper arm to bracket bolts & nuts
2x Upper arm ball joint nuts
4x Subframe bolts & washers
2x Subframe to upper arm bracket bolts & washers
2x Subframe to unibody bolts & washers (rear)
2x Subframe to rear diff mount bolts, washers & nuts
8x Subframe to rear sway bar mount bolts
4x Rear brake caliper mounting bolts & washers
Also need 4x Rear sway bar mounting brackets, seen in the picture.
Lastly, I need the subframe mounting bracket that's welded to the chassis. It will have to be drilled or cut out.