Mark this thread as Unsold
Feeler: AMS TBE Exhaust w/logo on tip
Thread Starter
Joined: Jul 2006
Posts: 703
Likes: 10
From: AA County, MD
Feeler: AMS TBE Exhaust w/logo on tip
Have had this exhaust for about 5 months.
Full 3" back from the turbo and it has a test pipe. I did the mechanical CEL fix and it works fine.
This is the newly designed exhaust with the AMS logo on the tip as seen in the next picture of my exhaust.
Condition: Exhaust has no dents anywhere, but there are a couple scratches on the tip of the exhaust near the logo. Also on the side of the canister there is a small rubbing spot where the plastic from the rear bumper rubbed that can. Size is about a penny. Will get some pics if people really are that concerned.
Also if you want you can come see the exhaust in person, I have nothing to hide.
When I first put the exhaust on with the different hangers it caused the tip to touch the rear bumper which melted plastic over the tip. I got a torch and heated up the tip and wiped off the plastic with a wet clothe and polished the tip. On stock hangers it hangs nice.
Got 99% of the plastic off which you wouldn't even know was there unless you got really close. Most of it is far back on the tip near the can so its covered up mostly.
Reason for selling if sold: Buying a different exhaust already modified for the JDM bumper. Just waiting to see if the guy still has it.
This exact TBE retails for $999 on AMS's website, was $1099 when I bought it. I would like to sell locally for $650 obo.
Full 3" back from the turbo and it has a test pipe. I did the mechanical CEL fix and it works fine.
This is the newly designed exhaust with the AMS logo on the tip as seen in the next picture of my exhaust.
Condition: Exhaust has no dents anywhere, but there are a couple scratches on the tip of the exhaust near the logo. Also on the side of the canister there is a small rubbing spot where the plastic from the rear bumper rubbed that can. Size is about a penny. Will get some pics if people really are that concerned.
Also if you want you can come see the exhaust in person, I have nothing to hide.
When I first put the exhaust on with the different hangers it caused the tip to touch the rear bumper which melted plastic over the tip. I got a torch and heated up the tip and wiped off the plastic with a wet clothe and polished the tip. On stock hangers it hangs nice.
Got 99% of the plastic off which you wouldn't even know was there unless you got really close. Most of it is far back on the tip near the can so its covered up mostly.
Reason for selling if sold: Buying a different exhaust already modified for the JDM bumper. Just waiting to see if the guy still has it.
This exact TBE retails for $999 on AMS's website, was $1099 when I bought it. I would like to sell locally for $650 obo.