CBRD @ JM Fabrications Sept 14th...
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
CBRD @ JM Fabrications Sept 14th...
get guys,
our good friends at JM fabrications are moving in to a new location, and to help them kick off an exciting and successful move, we will be at their open house to hang out and meet everyone...
we will bring some of our evos, maybe the race car....
so come say hi, meet our buddies at JM, JNZ, etc all on the same day..
here is the info they have:
The date has been set! JM Fabrications is proud to show off our new shop and location by having an open house open to the public so that anyone can stop by to say hi, meet the staff, and see our facility where we work our fabrication magic every day. How, when, where, and why you say? Here are the details:
Date: Sunday, September 14th
Time: 11am - 5pm
Location: Our new shop!
1571 Gehman Road
Harleysville, PA 19438
Our new shop is a million times easier to get to and find than our old location. In this picture below, you can see that we're only 3 turns off of the Lansdale, PA turnpike exit:
Know how to get to our old shop, but not the new one? In the meantime, you can use maps.google to find the best route to us so that you don't go too far out of the way, but here's a basic map of how we're only a few turns away from the old place:
Pull into either of the first two driveways on the left once you turn onto Gehman Rd. (really lowered cars are suggested to use the first of the two) and then turn right and follow the parking lot as far right and rear as it'll take you. Make sure to come to the "front" side of our building to park and not the loading dock side, unless parking spaces run out of course.
At the current moment, we have a few of our friends/businesses that we have asked to come out as well to set up some type of display and representation for themselves. These right now include:
CBRD Speed Factory
JnZ Finishing
GV Autosport
Blouch Turbo
R/T Tuning
We plan to have food and drinks supplied throughout the day for when hunger calls, so make sure you stop in early before it's all gone. There should be a few other activities that we're still working out the details for (possible raffles, maybe a moon bounce for the big kids inside us, etc.
) but in either case there should definitely be JMF garb available for purchase (with an updated logo too I hear--"ooooooooooh"), and we also are having a special open-house-day-sale! Anything purchased in full the day of the open house will receive a 10% discount on the price of the part(s)! **
So make sure you save this date, and let us share with you what you've helped us become.
our good friends at JM fabrications are moving in to a new location, and to help them kick off an exciting and successful move, we will be at their open house to hang out and meet everyone...
we will bring some of our evos, maybe the race car....
so come say hi, meet our buddies at JM, JNZ, etc all on the same day..
here is the info they have:
The date has been set! JM Fabrications is proud to show off our new shop and location by having an open house open to the public so that anyone can stop by to say hi, meet the staff, and see our facility where we work our fabrication magic every day. How, when, where, and why you say? Here are the details:
Date: Sunday, September 14th
Time: 11am - 5pm
Location: Our new shop!
1571 Gehman Road
Harleysville, PA 19438
Our new shop is a million times easier to get to and find than our old location. In this picture below, you can see that we're only 3 turns off of the Lansdale, PA turnpike exit:
Know how to get to our old shop, but not the new one? In the meantime, you can use maps.google to find the best route to us so that you don't go too far out of the way, but here's a basic map of how we're only a few turns away from the old place:
Pull into either of the first two driveways on the left once you turn onto Gehman Rd. (really lowered cars are suggested to use the first of the two) and then turn right and follow the parking lot as far right and rear as it'll take you. Make sure to come to the "front" side of our building to park and not the loading dock side, unless parking spaces run out of course.
At the current moment, we have a few of our friends/businesses that we have asked to come out as well to set up some type of display and representation for themselves. These right now include:
CBRD Speed Factory
JnZ Finishing
GV Autosport
Blouch Turbo
R/T Tuning
We plan to have food and drinks supplied throughout the day for when hunger calls, so make sure you stop in early before it's all gone. There should be a few other activities that we're still working out the details for (possible raffles, maybe a moon bounce for the big kids inside us, etc.
) but in either case there should definitely be JMF garb available for purchase (with an updated logo too I hear--"ooooooooooh"), and we also are having a special open-house-day-sale! Anything purchased in full the day of the open house will receive a 10% discount on the price of the part(s)! **So make sure you save this date, and let us share with you what you've helped us become.
