Ok boys and girls my friends over at Moore automive will be having a dyno day on June the 4th from 9:30am till the last car hits the rollers..Price to dyno will be $50 for 3 pulls,afr,print out and boost reading

Here is the address of the shop:

 

Thanks for posting Rene!

For the technical info, the dyno is a DynoJet 424xLC2 awd model (above ground with a 4 post lift). Never had a problem getting anything on it no matter how low, so that's not an issue.

We'll also have our projector screen set up like always so every one can see what you make.

I think we've found our max is around 25 cars, we might be able to get close to 30 depending on what type of cars show up (awd and luxury/exotic cars do take longer to set up).

Hope to see a lot of you up there!

~Chris@MooreAuto

 

Might try to come out. Car has never been on a dynojet, would be nice to see what it can make.

 

This is a great place and great group of guys Chris and the guys at Moore Automotive hosted us up there for a tuning day and its a great facility with a great dyno! Good luck on the dyno day brother and hope to hear from you soon!

-Matt

 

Good luck on the dyno day! You guys are going to be getting a lot of traffic through the shop over the next couple of weeks becasuse Spec-Ops, last I heard, should be up @ Moore Auto on the 11th for a Dyno Tuning day as well. I plan to be there for the dyno day on the 11th

I was up at the last Spec-Ops dyno day and it was a blast and the guys that work at Moore Auto are great guys.

Also, Rene (NoobSauce) we should chat when I come up there if you can make the time to swing by the shop on the 11th. See you then.

As always, if you guys ever need anything, feel free to let me know!

Mikey

 

of course, i couldnt make it to spec ops day (just left herndon) and now I will have just left arlington for work that morning. Great timing! haha. sounds like a blast. dyno days are sweeeeeeet. gl fellas

 

Bump

 

Hope to catch ya around next time brother! Safe travels

-Matt

 

No problem Chris..Thanks on the re tune,I love the new found power accross the board..hope you can send the graph tomorrow

 

This means you're back on the road! Hell, I'm coming out just to see you.

 

So did you dyno? The pumpgas terror lives on...

 

I might not be going for sure. Might have other plans.


Ha ha..says the guy who broke 6xx on pump gas on a dynojet

 

I may have to stop by and give it a try. I"m curious at what she"ll pull. Plus you guys are right around the corner from Gainesville.

 

Well we are offering services for those who need to do pre checks at a cost. It will be $175.00 but it will include Plugs "Evo IX "IKH24" Evo VIII "BR8ES" which are both one step colder if you have a certain plug you want gives us a ring and we will see what we can do,Synthetic Oil Change & Filter & Boost Leak check. If you need anything for the dyno day PM me or Chris so we can get you taken care of.

 

Bump