I have changed the direction I am going with my car so I am selling this as a complete setup only. Also for the time being, this is a local sale only! I am not interested in shipping or any trades at the moment. I am located in Rising sun, Md zip 21911.

I picked up the hot parts kit and the Tial 44mm MVR wastegate from a local this summer and the FP 3586 HTA from a part out thread on the DSMLink boards in September. This turbo was run on a track only 1g and has an elbow welded on the compressor cover that will likely need cut off. Everything needed to install this on an Evo minus the fan and intake is included.

The following items are included and are brand new.
ExtremePSI oil feed with restrictor.
ExtremePSI 10an push lock drain kit with aluminum bolt on flange for a stock oil pan. Includes bolts and gaskets.
ExtremePSI coolant fittings and 6' of push lock hose for coolant lines.
45*, 2.5", 4 ply silicon coupler with T bolt clamp for the lower intercooler pipe.

The turbo has a brand new T3, .82, 2.5" 4 bolt hotside on it. This kit is A/C compatible and has a stock cat back flange on the down pipe. There is some minor scuffs on the bottom of the down pipe but nothing that would affect performance. I am asking $2800 for everything. I also have a brand new 12" Spal fan I will include if needed for another $100.