Bolt pattern: GTS vs Evo X high wing
Thread Starter
Evolving Member
iTrader: (1)
Joined: Jul 2007
Posts: 263
Likes: 1
From: Altoona, Pennsylvania
So I have yet to find a answer to this but does the evo x wing use the same bolt pattern as the gts? aka can i swap out my gts wing for a evo x high wing?
Just wondering since theres a lot of good deals on here and my dealership would paint it aqua for $50 you cant beat it!
Thanks!
Just wondering since theres a lot of good deals on here and my dealership would paint it aqua for $50 you cant beat it!
Thanks!
Evolved Member
iTrader: (16)
Joined: Oct 2007
Posts: 1,710
Likes: 0
From: Daytona Beach/Melbourne, Florida
i think they ARE the same, but the evo X has one extra hole on each side. so for 2 of the holes, they line up, but you will have to drill one hole on each side for an extra bolt on the evo X wing
Trending Topics
Someone I know ordered an aftermarket "Evo-style" wing off eBay or something and the bolt pattern was different. He had to drill another hole, but the one that was there was covered up, so unless he were to take it off and put the old one on you'd never see it.
I would think that Mitsu would have made the bolt pattern the same between their Lancer/Evo wings, but I don't know for sure.
I would think that Mitsu would have made the bolt pattern the same between their Lancer/Evo wings, but I don't know for sure.
Crap! Why didn't I see this thread sooner?
I'd love to swap for the low wing!
On the Evo wing each side has 3 bolts, and one goes a different way from the others.
Somebody proposed that if I found someone in my area willing to swap, it might be easier to swap trunk lids, so the other guy doesn't have to drill holes, and I don't have to fill holes.
Now and then someone with a regular Lancer tells me, "Nice car", or "nice wing", but when I ask "Wanna trade wings?" they never do.
I'd love to swap for the low wing!
On the Evo wing each side has 3 bolts, and one goes a different way from the others.
Somebody proposed that if I found someone in my area willing to swap, it might be easier to swap trunk lids, so the other guy doesn't have to drill holes, and I don't have to fill holes.
Now and then someone with a regular Lancer tells me, "Nice car", or "nice wing", but when I ask "Wanna trade wings?" they never do.
Last edited by BluEvo210; Oct 8, 2010 at 09:14 AM. Reason: I think the low wing comes on Lancers besides GTS...
Crap! Why didn't I see this thread sooner?
I'd love to swap for the low wing!
On the Evo wing each side has 3 bolts, and one goes a different way from the others.
Somebody proposed that if I found someone in my area willing to swap, it might be easier to swap trunk lids, so the other guy doesn't have to drill holes, and I don't have to fill holes.
Now and then someone with a regular Lancer tells me, "Nice car", or "nice wing", but when I ask "Wanna trade wings?" they never do.
I'd love to swap for the low wing!
On the Evo wing each side has 3 bolts, and one goes a different way from the others.
Somebody proposed that if I found someone in my area willing to swap, it might be easier to swap trunk lids, so the other guy doesn't have to drill holes, and I don't have to fill holes.
Now and then someone with a regular Lancer tells me, "Nice car", or "nice wing", but when I ask "Wanna trade wings?" they never do.
Hmmm...
MN is a long way from FL, and I won't be back in the states until next July...
...but most of the GTS wings on the internet look a little expensive for my taste.
If we trade we each know we're getting a factory wing!
MN is a long way from FL, and I won't be back in the states until next July...
...but most of the GTS wings on the internet look a little expensive for my taste.
If we trade we each know we're getting a factory wing!






