sorry guys forgot to post it... not sure if there still some slots, limited only
http://forums.cobbtuning.com/forums/...ad.php?t=59297
http://forums.cobbtuning.com/forums/...ad.php?t=59297
Quote:
Origionaly posted by John in NASIOC;
"We have put together a very special dyno day/meet for TXIC and the DFW Mazda crew.
The meet will take place on Sunday, July 26th. Pizza and drinks will be provided. We will have access inside the shop as well so that we aren't cooking in the Texas sun. Staff will be on hand to help with purchases should the itch to buy some springs or a downpipe arises!
They Dyno Day portion of the meet will start at 9am sharp. Boost and AFR will be monitored. We have 15 slots available and a 10 slot back-up list. The cost will be $45 for 3 pulls. You are sharing these slots with Mazda owners so these slots are FIRST COME, FIRST SERVE.
Your car needs to be in top shape (i.e. fresh oil change, no leaks, no turbo issues, etc.). Cobb will inspect the car before it goes on the dyno. If your car experiences issues, it will be pulled and replaced with a back-up. They don't want cars breaking that day.
I will have a couple lists going on...one for attendees and another for the dyno. Let me know if you want to do one or both so that we can get a proper head count for food. Dyno times will be sent out once the time slots have been filled and compiled.
This is going to be a great time! Hope to see you guys out!"
-john-
Cliffs:
-TXIC/DFWMazda Meet Dyno Day
-Sunday July 26th
-Dyno @ 9am ($45 for 3 Pulls) / Meet time is flexible
-Cobb Tuning
1200 Placid Avenue
Suite 550
Plano, TX 75074
214.291.3020
cobbtuning.com
-Food and Drinks provided
Origionaly posted by John in NASIOC;
"We have put together a very special dyno day/meet for TXIC and the DFW Mazda crew.
The meet will take place on Sunday, July 26th. Pizza and drinks will be provided. We will have access inside the shop as well so that we aren't cooking in the Texas sun. Staff will be on hand to help with purchases should the itch to buy some springs or a downpipe arises!
They Dyno Day portion of the meet will start at 9am sharp. Boost and AFR will be monitored. We have 15 slots available and a 10 slot back-up list. The cost will be $45 for 3 pulls. You are sharing these slots with Mazda owners so these slots are FIRST COME, FIRST SERVE.
Your car needs to be in top shape (i.e. fresh oil change, no leaks, no turbo issues, etc.). Cobb will inspect the car before it goes on the dyno. If your car experiences issues, it will be pulled and replaced with a back-up. They don't want cars breaking that day.
I will have a couple lists going on...one for attendees and another for the dyno. Let me know if you want to do one or both so that we can get a proper head count for food. Dyno times will be sent out once the time slots have been filled and compiled.
This is going to be a great time! Hope to see you guys out!"
-john-
Cliffs:
-TXIC/DFWMazda Meet Dyno Day
-Sunday July 26th
-Dyno @ 9am ($45 for 3 Pulls) / Meet time is flexible
-Cobb Tuning
1200 Placid Avenue
Suite 550
Plano, TX 75074
214.291.3020
cobbtuning.com
-Food and Drinks provided
Quote:
there was 35 before but 45 is cheap too. how much normally the dynosOriginally Posted by Shimanchu
Right down the street from house and only $45 for three pulls? Tempting.
goofygrin was thinking we can do an NTEC dyno too @ Cobb. 30 cars easy for us i think.
dyno today at cobb plano.can someone read it for me, any good for stock MR.
Evolved Member
Stock stock, or "Stock" stock? I think 236 awhp and 249 awtq is pretty good for an off the shelf MR. If you go by the numbers Cobb puts out for the AccessPort, you would expect 280whp/296wtq from that same car with just the Stage 1 93 octane OTS map, plus a better area under the curve at the top end.
yeah it is still considered stock for just drop in and uicp. at least 300to the wheels is the goal.
Chris of Cobb say it's Ok for a NTEC dyno day. Give him a call Goffygrin. Im just 5 minutes away from that shop.
Cobb Plano
1200 Placid Avenue
Suite 550
Plano, TX 75074
214.291.3020
vidz.
http://www.youtube.com/watch?v=uHzzlm5dS4U
http://www.youtube.com/watch?v=V346jVtsF1U
sorry for the vidz. i have an HD vidoe cam and even to the lowest setting you tube cannot synchronize my audio and videos. i have to convert it but i use a free version so there is a banner.
Chris of Cobb say it's Ok for a NTEC dyno day. Give him a call Goffygrin. Im just 5 minutes away from that shop.
Cobb Plano
1200 Placid Avenue
Suite 550
Plano, TX 75074
214.291.3020
vidz.
http://www.youtube.com/watch?v=uHzzlm5dS4U
http://www.youtube.com/watch?v=V346jVtsF1U
sorry for the vidz. i have an HD vidoe cam and even to the lowest setting you tube cannot synchronize my audio and videos. i have to convert it but i use a free version so there is a banner.
http://www.motionbox.com/videos/7a9ad9b71614e3c3f5
as im having problem with you tube hd vidz. i found this better. motion box in hd. just to show the hd vidz. i know i already post it.
as im having problem with you tube hd vidz. i found this better. motion box in hd. just to show the hd vidz. i know i already post it.
Evolved Member
vimeo.com is a great site for HD videos.
Here's my dyno (from when I got my accessport back earlier this year)
At that time I had these power mods: AEM intake, full UR TBE with a ceramic HFC. Stage 2 custom map with the boost pill removed.
Here's my dyno (from when I got my accessport back earlier this year)
At that time I had these power mods: AEM intake, full UR TBE with a ceramic HFC. Stage 2 custom map with the boost pill removed.