Im looking for a shop that can roll my front fenders and pull the rear fenders. Does anyone know of such a place?

 

talk to booster... he did his own.. I think he just rented the machine to do it... I also have heard of it be done with a baseball bat

TXevo8 (Jim) cut his with an air saw and they came out really nice and he has no rubbing problems...

 

i would rent the tool and do it yourself, its not hard i did mine by myself

 

mine are already cut. Im running -3 degrees of camber all around and still rub. I really need to pull them out 3-4mm. If a roller can do that im all in.

 

there is a guy that pulled his out nasty..doesnt look to well..his sn is something like J8dailo

 

https://www.evolutionm.net/forums/ev...er-flares.html

 

I don't know about the 8/9, but on the X, it's very hard to roll the fronts. I was able to pull mine a bit. Rolling would have required me to take out the fender liner and there's barely any room in there (and rolling would have made the liner impossible to put back in.

 

https://www.evolutionm.net/forums/ev...ve-stance.html
thats really more what im talking about. Danny dude your right that ****s gross.

I really just need a mild pull like 3-4mm