NTEC 2014 FS/WTB thread (LOCALS ONLY!)
WTB for Evo IX:
New or Used 2-Piece Front Rotors
New or Used Street Pads
New or Used Stainless Brake Lines (all 4 corners)
Torque Solutions Front Motor Mount
Torque Solutions Shift Bushings (all)
Used Evo IX Mivec Valve Cover
-Acree
New or Used 2-Piece Front Rotors
New or Used Street Pads
New or Used Stainless Brake Lines (all 4 corners)
Torque Solutions Front Motor Mount
Torque Solutions Shift Bushings (all)
Used Evo IX Mivec Valve Cover
-Acree
FS for evo 8/9:
Mega racing coilovers, used, unknown miles: SOLD
APR front splitter, slightly used. off my pikes peak car. we replaced it with something bigger we are making in house. although the APR piece looks a lot better
$250
Mega racing coilovers, used, unknown miles: SOLD
APR front splitter, slightly used. off my pikes peak car. we replaced it with something bigger we are making in house. although the APR piece looks a lot better
$250
Last edited by KevinD; Jul 30, 2012 at 11:42 AM.
Thread Starter
Evolved Member
iTrader: (49)
Joined: Apr 2007
Posts: 8,970
Likes: 17
From: Prosper, TX
FS: Evo X ported/coated exhaust manifold
2010 manifold, "extreme" porting option from PPI, silver ceramic coated by SPC.
$250 cash local, $300 Paypal shipped (no core charge)
2010 manifold, "extreme" porting option from PPI, silver ceramic coated by SPC.
$250 cash local, $300 Paypal shipped (no core charge)
Alright im sending a PM to everyone tommorow who pm'ed me but I got an acceptance letter in the mail today and Im staying in Dallas apparently they were testing my patience the last week and they even fronted me a weeks pay since I dont start 3 weeks from now!
Def didnt mean to waste anyones time or get anyones hopes up but I wanted to plan ahead.
Evo X Possible part out - Reason found a job but may need to relocate to Houston or Austin and I may need the money to relocate. I don't have stock parts but I'm sure we can work a deal on swapping.
MR BBS Wheels - FOR STOCK GSR
Full Perrin Exhaust from turbo back
AMS intercooler
Full Cobb piping in silver
Cusco front strut bar and sways all around
Lowered on Belstein struts and eibach sports
I think that's it besides the Cobb stage 2 tune.
Depending on what branch they want me at I may end up in Dallas still but I need to prepare for moving expenses if so.
apparently they were testing my patience the last week and they even fronted me a weeks pay since I dont start 3 weeks from now!Def didnt mean to waste anyones time or get anyones hopes up but I wanted to plan ahead.
Evo X Possible part out - Reason found a job but may need to relocate to Houston or Austin and I may need the money to relocate. I don't have stock parts but I'm sure we can work a deal on swapping.
MR BBS Wheels - FOR STOCK GSR
Full Perrin Exhaust from turbo back
AMS intercooler
Full Cobb piping in silver
Cusco front strut bar and sways all around
Lowered on Belstein struts and eibach sports
I think that's it besides the Cobb stage 2 tune.
Depending on what branch they want me at I may end up in Dallas still but I need to prepare for moving expenses if so.
Last edited by ApexSilverBeast; Jul 24, 2012 at 12:30 AM. Reason: MODS DELETE/NO LONGER FOR SALE :)
for sale, or trade for certain things (looking for a legit exhaust)
all prices are sans shipping.
oem bov, evo ix $80
oem fmic - $100
oem a pillar cover, new drivers side - $30
rexspeed vortex generator, needs to be repainted. all the fins have a chip on their tip and there are a few scratches on the generator itself - $50
PLEASE NOTE! this vortex generator is not color matched. one of the issues i had with it is that it is darker than electric blue. i didnt originally mention it because i was sure whoever buys it would have to repaint it.
autometer triple gauge pod, installs under the stereo/hvac controls - $24
oem struts/springs/shocks, not in the best condition and arent any good really. not leaking but rough ride so i suspect they are done. perfect for someone who is reconverting their car back to oem to sell off their goodies. will NOT ship - $150
Tein EDFC , One motor has wires broken off, will be resoldering and heat wraping so they work. controller has residue from previous owner using adhesive to mount it. pics coming soon - $200
GSC Beehive springs, bnib, $150
Autometer Dual Steering column pod - $25
Silicone 45 degree 4" to 2-1/2 reducer, in blue - $15
located in euless, i prefer not to have to ship this. asking 120+shipping
works, in good condition, just upgraded to a monster sub and no longer need this small one, lol
all prices are sans shipping.
oem bov, evo ix $80
oem fmic - $100
oem a pillar cover, new drivers side - $30
rexspeed vortex generator, needs to be repainted. all the fins have a chip on their tip and there are a few scratches on the generator itself - $50
PLEASE NOTE! this vortex generator is not color matched. one of the issues i had with it is that it is darker than electric blue. i didnt originally mention it because i was sure whoever buys it would have to repaint it.
autometer triple gauge pod, installs under the stereo/hvac controls - $24
oem struts/springs/shocks, not in the best condition and arent any good really. not leaking but rough ride so i suspect they are done. perfect for someone who is reconverting their car back to oem to sell off their goodies. will NOT ship - $150
Tein EDFC , One motor has wires broken off, will be resoldering and heat wraping so they work. controller has residue from previous owner using adhesive to mount it. pics coming soon - $200
GSC Beehive springs, bnib, $150
Autometer Dual Steering column pod - $25
Silicone 45 degree 4" to 2-1/2 reducer, in blue - $15
located in euless, i prefer not to have to ship this. asking 120+shipping
works, in good condition, just upgraded to a monster sub and no longer need this small one, lol
Last edited by rick1024; Jul 30, 2012 at 07:04 PM.
Evo X front bumper support with Rennline folding tow hook installed. The hook also has the Rennline GoPro mount. I will include the front bumper tow hook cover piece that I've cut perfectly. This is a steel tow hook mounted to front bumper support with grade 3 hardware so it's fully functional. To be clear I am selling the entire front bumper support so it's an easy bolt on.
I'll help you instal it if you want but it's very straight forward. I've already done all the hard work. I bought a different front bumper support so this one has to go.
$150 local pick up only and I'll help instal.
I'll help you instal it if you want but it's very straight forward. I've already done all the hard work. I bought a different front bumper support so this one has to go.
$150 local pick up only and I'll help instal.
Last edited by Subi.convert; Jul 21, 2012 at 08:27 AM.
well, its that time again. i need money to do a clutch install so these items are for sale.
one NEW DBA 5000 series 2 piece drilled and slotted front rotor for an evo 8/9
set of EBC blue stuff brake pads for the front.
pads: 160 picked up
rotor:350 picked up
located in plano and can meet anywhere in the area.
one NEW DBA 5000 series 2 piece drilled and slotted front rotor for an evo 8/9
set of EBC blue stuff brake pads for the front.
pads: 160 picked up
rotor:350 picked up
located in plano and can meet anywhere in the area.
Last edited by 05VIII; Jul 23, 2012 at 07:10 PM.